Nitrous links??

[zpwn06]

Re: Nitrous links??

And bolt-ons.

which would you recommend?

[bottlefedv6]

Re: Nitrous links??

Tuning a nozzle? Are you kidding? Come on man. 8 inches away from the MAF, pointing at it. There you go, the secret to nozzle tuning on a dry kit. Quit regurgitating all the same old crap. You don't need a fuel pump for a 100 hit. Period. The stock fuel system will support 275rwhp all day long. Good gas and good plugs are all you need on a stock/mild car.

sure anyone can do that, but if you want the safest, you clock the nozzle to get the desired a/f ratio while on the bottle. Trust me it makes a difference just like bottle psi makes a difference. Go ahead and do what you want, I know I like to get the most from my car and still have a motor later.

if the fuel pump is older or has quite a bit of miles on it then it might not keep up with a 100 shot. Yes people have run 100 on the stock pump. Better safe than sorry though and therefore getting a pump helps run safely. But to tell someone to start out on a 100 shot is just stupid and childish.

[bottlefedv6]

Re: Nitrous links??

which would you recommend?

see my post above yours, exhaust and CAI are recommended mods.

[Bird_Of_Prey]

Re: Nitrous links??

sure anyone can do that, but if you want the safest, you clock the nozzle to get the desired a/f ratio while on the bottle. Trust me it makes a difference just like bottle psi makes a difference. Go ahead and do what you want, I know I like to get the most from my car and still have a motor later.

if the fuel pump is older or has quite a bit of miles on it then it might not keep up with a 100 shot. Yes people have run 100 on the stock pump. Better safe than sorry though and therefore getting a pump helps run safely. But to tell someone to start out on a 100 shot is just stupid and childish.

You're right. I have no idea what I'm doing. I didn't spray my v6 for over 7 years. I blew the motor up every pass. Nitrous is terrible!!!!! omgzorz!!!!!1!!!! Clocking the nozzle is bull. Straight on the MAF is the most effective way. If you need to tune A/F use HP Tuners or the like. Clocking the nozzle will just freeze whatever the nozzle is pointing at. Do you really want to clock the nozzle down and build ice up on the bottom of your throttle body so it won't close at the end of the track? Cause that sure sounds alot more dangerous to me than a blown engine. Guess I'm just a stickler for personal safety. BTW, what does your car run?

[bottlefedv6]

Re: Nitrous links??

clocking the nozzle and nozzle placement allows you to run two tunes in one if you have hptuners. You can tune your car for optimal NA running and then with correct nozzle placement and clocking you can have it run great on nitrous as well without going into the computer and uploading a new tune for nitrous. Sure it works pointing straight at the maf, never denied the fact that it wouldn't work. But if you are after the best times and optimal setup you will understand that playing with the nozzle can net you even better results and such. Don't listen to me if you don't want to, but just go read up on other sites then or ask away on ls1tech, they will tell you the same thing as me.

I don't care that you ran 7yrs with nitrous on your car. Telling someone to start out with a 100 shot is just stupid and not having the best interest of the user in mind. Some cars love the nitrous and will be fine, others will have a ton of KR with a 100 shot. Start out small and move up

[Shodown]

Re: Nitrous links??

I will agree that a fuel pump is a good idea for a 100 dry shot. You are playing with fire using the stock pump.

And yes, you can tune the AFR by turning the nozzle. Though, this doesnt do any good without a wideband.

[Bird_Of_Prey]

Re: Nitrous links??

100 is small. You've got your tuning all wrong as well. Mine was setup to drop timing whenever the MAF responded to the -27 degree nitrous hitting it, thus no need for seperate NA and nitrous tunes. So, what's your car run? Since you bothered not to reply the last time I asked.

[mattyacks]

Re: Nitrous links??

i have bolt ons......i just wanna run a 75 shot.....do i need to upgrade my pump? how much are trhey

[Shodown]

Re: Nitrous links??

You're fine for a 75 shot. Walbro 255 pumps usually run about $125.

[bottlefedv6]

Re: Nitrous links??

100 is small. You've got your tuning all wrong as well. Mine was setup to drop timing whenever the MAF responded to the -27 degree nitrous hitting it, thus no need for seperate NA and nitrous tunes. So, what's your car run? Since you bothered not to reply the last time I asked.

how do you drop timing when the maf reads -27* of nitrous? The maf isn't reading that, the IAT sensor is and hptuners only allows you access to timing adjustments using the IAT tables. So yes if your spraying your nitrous over the IAT sensor you get the two tunes in one which is what I was talking about in my post about nozzle placement, thanks for confirming what I was talking about.

I ran 13.3 last year thanks for asking. Not sure what that has to do with this conversation but yes I have run wet and dry kits. :tup:

[Bird_Of_Prey]

Re: Nitrous links??

how do you drop timing when the maf reads -27* of nitrous? The maf isn't reading that, the IAT sensor is and hptuners only allows you access to timing adjustments using the IAT tables. So yes if your spraying your nitrous over the IAT sensor you get the two tunes in one which is what I was talking about in my post about nozzle placement, thanks for confirming what I was talking about.

I ran 13.3 last year thanks for asking. Not sure what that has to do with this conversation but yes I have run wet and dry kits. :tup:

Nothing to do with the IAT sensor. MAF reads density change and adjusts timing tables accordingly.

[Shodown]

Re: Nitrous links??

Nothing to do with the IAT sensor. MAF reads density change and adjusts timing tables accordingly.

:tup:

You can remove the IAT and still adjust the timing tables. TurboV6Camaro does that. In fact, his IAT is just chillin' on top of his throttle body lol.

[vanbibber]

Re: Nitrous links??

[Firebirdkid96]

Re: Nitrous links??

Me too.

Just curious, what do you guys think of the NOS-5177 kit?

[bottlefedv6]

Re: Nitrous links??

Me too.

Just curious, what do you guys think of the NOS-5177 kit?

kit is fine, just packaged as a "V8" but works just like the 5175 kit, nothing really "better" in that kit.