knock help

[akirony]

Re: knock help

Before I went to work this morning I popped my hood to check out my pwr str pump. Wiggled the pump but nothing then pulled the pulley about 3mm away from the pump. The pulley just moves back and forth if your yanking on it., but it doesnt while the engine is running. Dnt really know if this is normal or what. I then put some rubber under the IC bracket and that took alot of vibration away but the pwr str pulley is worrying me. Should I just replace it?

[ssms5411]

Re: knock help

Before I went to work this morning I popped my hood to check out my pwr str pump. Wiggled the pump but nothing then pulled the pulley about 3mm away from the pump. The pulley just moves back and forth if your yanking on it., but it doesnt while the engine is running. Dnt really know if this is normal or what. I then put some rubber under the IC bracket and that took alot of vibration away but the pwr str pulley is worrying me. Should I just replace it?

I would replace it , shouldn't move at all.

[akirony]

Re: knock help

Ok thanks for all the help again. Im gonna roll with the pwr st pump for now. I put my car on the lift tuesday. All mounts are gone and id just replaced a trany mount-ujoints are still good- may rebalance my wheels just for the heck. That rubber is holding the coil bracket pretty still. TCC code is still gone-and the B&M is shifting hard as always. ES mounts are coming.