1st scan.. any tips?

[Turbo V6 Camaro]

Originally posted by Matt G:
I recieved a responce from Keith at HP Tuners and he said that they have never had a PCM like mine, that is why I can't rewrite it. They told me in 1-2 days they will re-write my VCM Suite file and send me a new one so I have to wait to tune until then.

I am going to go buy a 160 thermo for my car, how do I install one of these?

I will be increasing timing when I get my new suite file and doing the table swap as you said.

Here is another scan up a hill WOT dropping from 5th to 3rd gear then running 3rd to redline(67-94mph), there is no KR, notice anything else wrong though?

**ignore past frame 337.. I tried to shorten the log and it didn't work out to well**

you forgot the link [img]tongue.gif[/img] [img]tongue.gif[/img] [img]tongue.gif[/img] [img]tongue.gif[/img]

[Matt G]

http://amoxsoft.com/mike/new2/view.p...ber_view=mattg

oops [img]graemlins/slap.gif[/img]

[Turbo V6 Camaro]

only thing i can see off the bat is you injectors are at 20ms already thats about max i think

i need to see your hole logs to find out..... email that and your bin to me (not the excel the accualt .hpl file for it) i can work on it while you wait for HP Tuners

[Matt G]

my .hpl file can't be edited... HP built something into the program so that if there is an error you have to send them the file and they have to fix it before I can change anything.

When you open the hpl in the editor none of the editing features get highlighed

I've been checking my e-mail every hour waiting for the arrival of the file from them.. hope its soon

[Matt G]

okay just got done installing a 180 degree thermo.. was pretty easy.. here is a new scan..

starting in frame 593 is a run from 0-93mph
coolant temps are now staying around 180.. the highest it went was 187 which is great compared to the temp it was before the new thermo.. 207

http://amoxsoft.com/mike/new2/view.p...ber_view=mattg

just a side note... my heater sucks now [img]graemlins/rofl.gif[/img]

[Turbo V6 Camaro]

Originally posted by Matt G:
okay just got done installing a 180 degree thermo.. was pretty easy.. here is a new scan..

starting in frame 593 is a run from 0-93mph
coolant temps are now staying around 180.. the highest it went was 187 which is great compared to the temp it was before the new thermo.. 207

http://amoxsoft.com/mike/new2/view.p...ber_view=mattg

just a side note... my heater sucks now [img]graemlins/rofl.gif[/img]

my heater still chace's me out of the car

[Matt G]

mine has a little heat coming out of it.. but nothing compared to what it uste to do.. I uste to be able to leave my hands infront of it for like 2 seconds when they were frozen and they would heat up. now when I do that it take like 20 seconds to heat them up.. very noticeable difference with the heat

[Turbo V6 Camaro]

flush your coolent

[Matt G]

how? never done it before

[Matt G]

never mind my car just wasn't warmed up all the way. doh [img]graemlins/slap.gif[/img]

[Turbo V6 Camaro]

Originally posted by Matt G:
never mind my car just wasn't warmed up all the way. doh [img]graemlins/slap.gif[/img]

[img]graemlins/rofl.gif[/img] [img]graemlins/rofl.gif[/img] i was goign to say it should blow heat faster, not as hot but warm air should come out faster....the thermo opens at 180 and not 195 now