O2 question? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

O2 question?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • O2 question?

    I know you can't really tune from the inaccurate redings from the O2 sensors. I just would like to know this for my general knowledge.
    Can someone explain the redings that the O2 senors give off, like what should they be at idle, acceleration, and what would be a lean readin vs. a rich reading.
    Thanks in advance for the info.
    Modifications:<br />headers, throtle bod spacer, flowmaster, high flow magnaflow carsound cat, powerdyne sc with 2.9\" pulley and by-pass valve, walboro 255 fuel pump, spec stage 2 clutch, and HP Tuners

  • #2
    800-900's with power dyne should be "safe" however it verys so much from car to car its really hard to say

    idle they should bouce around alot
    www.turbov6camaro.com
    1997 3800 Series II Camaro
    4600 Stall for my ride to the mall :chug:
    7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
    11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

    Comment


    • #3
      ...they should bounce around cause they're only halfway accurate at ~5mv?
      narrowband is horrible
      2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

      Comment


      • #4
        Out of curiosity what should they be NA?

        Should they bounce around alot at cruise and also deceleration?

        Is it normal to have a flucuation like this during acceleration at 30% throttle?
        bank 1 --- bank 2
        694 ----- 773
        95 ------ 48
        764 ----- 612

        Sometimes I get this too
        bank 1 --- bank 2
        755 ----- 430
        790 ------ 87
        790 ------ 56
        113 ------ 61

        Thanks

        [ January 12, 2006, 10:23 AM: Message edited by: 2002 v6 camaro uncharged ]
        Modifications:<br />headers, throtle bod spacer, flowmaster, high flow magnaflow carsound cat, powerdyne sc with 2.9\" pulley and by-pass valve, walboro 255 fuel pump, spec stage 2 clutch, and HP Tuners

        Comment


        • #5
          Originally posted by 2002 v6 camaro uncharged:
          Out of curiosity what should they be NA?

          Should they bounce around alot at cruise and also deceleration?

          Is it normal to have a flucuation like this during acceleration at 30% throttle?
          bank 1 --- bank 2
          694 ----- 773
          95 ------ 48
          764 ----- 612

          Sometimes I get this too
          bank 1 --- bank 2
          755 ----- 430
          790 ------ 87
          790 ------ 56
          113 ------ 61

          Thanks
          kinda looking like you may want to replace both of those if they are old..... bank1 seems to have a slow response

          only time they will be "stable"-ish is at WOT
          www.turbov6camaro.com
          1997 3800 Series II Camaro
          4600 Stall for my ride to the mall :chug:
          7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
          11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

          Comment

          Latest Topics

          Collapse

          There are no results that meet this criteria.

          FORUM SPONSORS

          Collapse
          Working...
          X