Tweet
The 98s still have the angled throttle body with drive by wire throttle control right? So, 98 PCM should just plug right into my 97 Camaro?
-
1997 Camaro Y87. Turbo.<br /><a href=\"http://pureoctaneracing.net/\" target=\"_blank\">Pure Octane Racing</a> -
Re: 97 PCM to 98 PCM conversion
I don't think so, I believe the 97s had a certain pcm system (which took forever to figure out for the hp tuners programmers) therefore the 97-98 PCMs are not swappable. -
Re: 97 PCM to 98 PCM conversion
it shouldComment
-
Re: 97 PCM to 98 PCM conversion
Dammit, I need this for the HPTuner.Originally posted by 97rs4life1997 Camaro Y87. Turbo.<br /><a href=\"http://pureoctaneracing.net/\" target=\"_blank\">Pure Octane Racing</a>Comment
-
Re: 97 PCM to 98 PCM conversion
You have a 97? You going to the mifbody.com meet and greet may 13?Originally posted by ChronoGNComment
-
Re: 97 PCM to 98 PCM conversion
yeah, no go on the 97 to 98 pcm. Are you talking about the HPP+ hand held programmer? Or the HPtuners program? If your talking about the HPtuner program, that program works for 97 pcms.Black 1996 3.8 Firebird T5, SLP CAI, Pacesetter Ceramic Headers,160* t-stat, PCMforLess Tune, Flowmaster American Thunder catback, Car Sounds Cat, custom s-pipe, MSD coils and wires, NGK plugs, 3.42 posi rear, B&M Ripper, 245/50 BFG-G-force'sComment
-
Re: 97 PCM to 98 PCM conversion
he wants to buy a 98 hp tuners and use it on his 97 car. that is a no go for him doing that.Originally posted by HarrisonComment
-
Re: 97 PCM to 98 PCM conversion
I might. I'm already planning on going to the track on the 12th so it just depends on how much money I have left for gas.Originally posted by 97rs4life1997 Camaro Y87. Turbo.<br /><a href=\"http://pureoctaneracing.net/\" target=\"_blank\">Pure Octane Racing</a>Comment
-
Re: 97 PCM to 98 PCM conversion
are you looking for basic stuff tuned (fans, tm, etc?) or looking for a full custom tune for your car?Comment
-
Re: 97 PCM to 98 PCM conversion
I need to get the timing and the A/F ratio tuned right. Like I need to get the computer tuned for my 36# injectors so I can get rid of the FMU.
Also, I need to look at the MAF sensor readings because I am pretty sure that is pretty messed up from the 180degree bent pipe.1997 Camaro Y87. Turbo.<br /><a href=\"http://pureoctaneracing.net/\" target=\"_blank\">Pure Octane Racing</a>Comment
-
Re: 97 PCM to 98 PCM conversion
I did little research, you can do 96 to 97 and use HPT for 97 ,
97 and 98 have different pinouts . we use to have here onsite nice specs/pinouts for all years, couldnt find it anymore
Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment