Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Uhm, I dunno. You'd have to have a tuner or something like that. When I did the gear swap on my car i just sent it to TSP with a letter stating what i had and what I put in and what I wanted them to do. I'm sure you could take it to a dealer and just have them reprogram it. Otherwise, I don't know how to do it
99 WS6
13.25@104.97 - Lid + soon to be more other stock items ;D
Originally posted by camaroextra
tears are great lube, but its hard to get a girl to cry onto her own ***.
Dealer is the only way I know how. My car had the 3.42 (GU6) with drums (yes... it was a freak) so it is possible with the programming. I just did a swap out of a Z rear end with 3.42 posi/disc.
FirebirdV6.com/CamaroV6.com Administrator
Stupid is rewarded with the ban button.
Official Avatar Nazi according to Meatyshells :D
If so look into getting a Jet Scu 2000 unit. It allows you to adjust for gears and also remove your speed limiter.
Dealer I don't think can do it unless it is 97+ I had mine done at a dealer before HPtuners came out for the 3.8. Since you have a 3.4 I don't think this is an option. You can look into it though.
Jet scu 2000 though is a way to fix it.
Also does the 99 rear end have TCS and ABS? How about your current car?
If so look into getting a Jet Scu 2000 unit. It allows you to adjust for gears and also remove your speed limiter.
Dealer I don't think can do it unless it is 97+ I had mine done at a dealer before HPtuners came out for the 3.8. Since you have a 3.4 I don't think this is an option. You can look into it though.
Jet scu 2000 though is a way to fix it.
Also does the 99 rear end have TCS and ABS? How about your current car?
you are going to have to get some type of aftermarket programmer available for your car.
You can forget about going to the dealership, I am not positive about your 94 f-body but i doubt it is adjustable with the tech 1 and GM will definatly not program cars that old. if they do, I will pay myself a lot of money :D
If so look into getting a Jet Scu 2000 unit. It allows you to adjust for gears and also remove your speed limiter.
Dealer I don't think can do it unless it is 97+ I had mine done at a dealer before HPtuners came out for the 3.8. Since you have a 3.4 I don't think this is an option. You can look into it though.
Jet scu 2000 though is a way to fix it.
Also does the 99 rear end have TCS and ABS? How about your current car?
sorry to jack the thread but 97rs4life, i have a 97 so u think they could to it? and how much would it cost?
sorry to jack the thread but 97rs4life, i have a 97 so u think they could to it? and how much would it cost?
this was before hptuners was around and I had to go to a couple dealers before finding one that would do it as it was against rules to change the vins and that is what was being done within the PCM. I had to use a vin from a y87 car and they had to burn it in.
With hptuners it is only a couple clicks away from changing it. If you do this just send your PCM to me and I can change it for ya. ;)
this was before hptuners was around and I had to go to a couple dealers before finding one that would do it as it was against rules to change the vins and that is what was being done within the PCM. I had to use a vin from a y87 car and they had to burn it in.
With hptuners it is only a couple clicks away from changing it. If you do this just send your PCM to me and I can change it for ya. ;)
if i had another car to drive i would send the pcm to you
dont you have to program the tranny as well?
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...
Hi, everyone. We bought a 97 base model convertible Camaro and someone broke the motor ... Lights were blinking on the dash and that someone ignored the...
Still trying to find oil leak on my Camaro, it’s a tough one. I think it is the oil pressure sender myself. Leaking when raving and going into boost....
2 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Need Help With Rear End Swap
Comment