went to go get my car inspected today and got a systems not ready rejection. the guy inspecting it said since my car is a 97 i am allowed to fail 2 out of the 11 readiness monitors. i failed catalyst, 02 sensor heater, and EGR system. if i can get one of those to go away, i can pass. any idea on what to do? My SES light is not on.. and i dont know what if anything i can do in hptuners to help me out. thanks guys!
Announcement
Collapse
No announcement yet.
failed inspection
Collapse
X
-
Re: failed inspection
Does selecting "Error not reported" for those systems codes not help, or is that what made it fail? Only one I can think of off hand to fix is maybe the EGR. Just set the temperature so high, it never comes on.'99 Mountaineer AWD 5.0 - 4300K HID, Some Bolt-ons
'97 RS - HPTuner, Bolt-ons
'09 WRX - Aesthetic mods
-
Re: failed inspection
If you have HP tuners go into DTC's and click on the ones you want deleted to no error reported and it will not come up on any scan they do. I have no cat, egr, and evap all deleted and it passes everytime, because all they do with mine is plug their scanner in to see if there are any codes.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: failed inspection
Originally posted by dmw319 View PostMy SES light is not on.. and i dont know what if anything i can do in hptuners to help me out.
Click the "Engine Diagnostics" tab, then in the new window that pops up, go over to the "DTC" button. Once there, find all the codes that are giving you problems, and in the "Error Mode" column, click down to "3 - No error reported," then reflash your PCM
Comment
-
Re: failed inspection
Originally posted by ssms5411 View PostIf you have HP tuners go into DTC's and click on the ones you want deleted to no error reported and it will not come up on any scan they do. I have no cat, egr, and evap all deleted and it passes everytime, because all they do with mine is plug their scanner in to see if there are any codes.
thanks i will try this. i am pretty sure all the ones i have turned off already say 3-no error reported.. but oh well. ill double check.
thanks also smoke panther.Dave:
00 Supercharged Camaro - RIP
97 Turbo Camaro - Sold
Comment
-
Re: failed inspection
doesnt just driving around fix that problem? have you had the battery dissconnected recently? or the pcm flashed?
i went to get my car inspected and my pcm wasnt "ready" because i was working on the car that night with the battery dissconnected. told me to come back after i drive around for ~50 miles. Came back and passedLast edited by Meatyshells; 06-13-2008, 10:45 PM.
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted
Comment
-
Re: failed inspection
Originally posted by insaneABOT View PostI'm surprised that you passed the under hood inspection. Maybe it's because your in Carolina. The smog inspections maybe different from California standards.
I Can't even pass visual. I have to look around for a tech that would.
1998 Firebird . 1989 Firebird XS . 1986 Fiero GT
Comment
-
Re: failed inspection
Cali does suck my car is all stock and still I could not pass the inspection guy told me that the car was to rich at idle and that would not let my car pass the smog inspection. So if I ever want to go turbo I know for a fact I'm never going to pass smog. Unless I bribe the guy so he can pass it.Last edited by insaneABOT; 06-14-2008, 10:07 AM.
Comment
Latest Topics
Collapse
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.2 days ago
-
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...4 days ago
Comment