Loss of power, P0300 pending - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Loss of power, P0300 pending

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Loss of power, P0300 pending

    I have a 2002 Pontiac Firebird V6. The other day after getting off the 4 lane, I had to step on it. But not much happened. I ended up getting the service engine light flashing for a moment. (P0300 code pending, random and multiple misfire). Put car in shop and fuel filter was stopped up. Shop replaced it. Driving to work today, it does not have much power and when I opened it up, service engine light flashed a few times and had a P0300 pending code. I used fuel system cleaner and filled up with premium gas at lunch. It still is not wanting to run right (not much power). It will get up to highway speed (70) with not much problem but not much power when I accelerate and rpms go up higher than when it was running correctly. 124,500 miles and I just posted on here about a rattle that takes place around end of transmission and around exhaust. It only lasts up to about 2 minutes at the most when engine is cold. Makes me wonder if it is the cat convertor.

  • #2
    Re: Loss of power, P0300 pending

    your cat could be the cause but it would throw an emissions related code for sure

    Comment


    • #3
      Re: Loss of power, P0300 pending

      how old is the cat?

      Comment


      • #4
        Re: Loss of power, P0300 pending

        Original cat. On the way home on the four lane, i got up to 90 before the service engine light came on. Seems to be running a little better with a little more power but gave code P0304, misfired cylindar 4

        Comment


        • #5
          Re: Loss of power, P0300 pending

          same problem on a 01 malibu 3.1 it was the cat..
          2001 Camaro 3.8 A4
          1991 3000GT VR4
          2001 Mitsubishi Eclipse GS

          Comment


          • #6
            Re: Loss of power, P0300 pending

            p0300 is a cam code u only get those wit bigger cams usually or theres a prob with it

            Comment


            • #7
              Re: Loss of power, P0300 pending

              Originally posted by bwkmaro View Post
              p0300 is a cam code u only get those wit bigger cams usually or theres a prob with it
              wtf are you talking about, p0300 is a misfire code and doesnt have anything to do with a cam.



              I would check, spark, wires, fuel pressure, o2sensors, and cat.

              Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted

              Comment


              • #8
                Re: Loss of power, P0300 pending

                thats a code that i heard often gets thrown with a cam and yes i would change the coils out cause i checked mine a while back and it said they were fine but i was still missing after i did my plugs and wires so for the hell of it i swapped out for new acdelcos and it ran great after

                Comment


                • #9
                  Re: Loss of power, P0300 pending

                  sry for faulty info

                  Comment


                  • #10
                    Re: Loss of power, P0300 pending

                    plug wires that would be my first guess if that aint i check the plug then coils

                    Comment


                    • #11
                      Re: Loss of power, P0300 pending

                      you can try switch the coils around to see if the misfire jumps to a different cylinder other then #4

                      Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted

                      Comment


                      • #12
                        Re: Loss of power, P0300 pending

                        Thanks for all replys!

                        Comment


                        • #13
                          Re: Loss of power, P0300 pending

                          fogman, did you get this fixed? If so what was the resolution? I just got the same thing on mine, knew it was coming though. It did the same thing 3 years ago but that time it gave me more time to plan to repair it now I'm having to scramble to get parts and time. GM should have come up with different level idiot lights. One that starts out hey idiot this needs to be fixed and progresses to hey stupid your car is gonna break.
                          Let's flip a coin. Heads I get tail, Tails I get head.

                          Comment


                          • #14
                            Re: Loss of power, P0300 pending

                            Update: it was the cat. converter. I had it replaced and the car will now run like it is supposed to.

                            Comment


                            • #15
                              Re: Loss of power, P0300 pending

                              thanks for updating, on mine it turns out it was the number 2 & 5 coil pack. New plugs wires and a coil pack and she's back to running. Still feels sluggish but I may just be wanting her to be something she's not.
                              Let's flip a coin. Heads I get tail, Tails I get head.

                              Comment

                              Latest Topics

                              Collapse

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X