No sound after new head unit install :(

[nimrod.sixty9]

Re: No sound after new head unit install :(

Do you guys really think I need to rewire when it was working just 20 minutes before?

Still wish I had a decent wire color chart. There are a **** load of wires cut that I dont have hooked up. And again, I know Ive heard all the speakers work for about 2 seconds and then a click from the stock amp.

[flamingchicken]

Re: No sound after new head unit install :(

if you really need to go to advanced auto and get a new plug...then go color to color.

[nimrod.sixty9]

Re: No sound after new head unit install :(

Factory harness was cut out. Tried to find one at the JYard yesterday, but no luck. Like to wire that back up and then buy the adapter so that way I KNOW it correctly wired :D

Unless of course your saying AA would sell me a stocker one?

[Kevin01]

Re: No sound after new head unit install :(

Pin Wire Color Circuit Number Function
E1 Dark Green 117 Right Front input -
E2 Grey 118 Left Front input -
E3 Tan 201 Left Front input +
E4 Dark Blue 46 Right Rear input +
E5 Light Blue 115 Right Rear input -
E6 Yellow 116 Left Rear input -
E7 Brown 199 Left Rear input +
E8 Black 650 Ground
E9 Black 650 Ground
E10 Unused Unused Unused
E11 Orange 1040 Fused battery feed
E12 Orange 1040 Fused battery feed
E13 Black 1856 Left Subwoofer +
E14 Yellow 1956 Left Subwoofer -
E15 Dark Blue 1857 Left Front speaker +
E16 Light Blue 1957 Left Front speaker -

F1 Light Green 200 Right Front input +
F2 Light Green 1852 Right Subwoofer +
F3 Purple 1952 Right Subwoofer -
F4 Light Blue / Black 315 Right Subwoofer -
F5 Dark Green 1795 Right Subwoofer +
F6 Dark Green 1953 Right Front speaker -
F7 Orange 1853 Right Front speaker +
F8 Unused Unused Unused
F9 Unused Unused Unused
F10 Light Green / Black 1794 Left Subwoofer -
F11 Dark Blue / White 346 Left Subwoofer +
F12 Unused Unused Unused
F13 Red 1955 Right Rear speaker -
F14 Tan 1855 Right Rear speaker +
F15 Tan 1859 Left Rear speaker +
F16 White 1959 Left Rear speaker -

I found this is for monsoon system.. I would assume would be the same.

I had royal pain installing stereo in my car.. I ended up rewiring all the speakers really did not take that long.

[nimrod.sixty9]

Re: No sound after new head unit install :(

That thing has got me lost. Im seeing doubles?!

[timthescarred]

Re: No sound after new head unit install :(

downloaded these somewhere, supposed to be for a 2000 camaro with the monsoon setup, maybe it will help someone.

[nimrod.sixty9]

Re: No sound after new head unit install :(

The one I followed actually LOL Thanks

FSM

[timthescarred]

Re: No sound after new head unit install :(

posted the same one twice earlier... here is the other

[nimrod.sixty9]

Re: No sound after new head unit install :(

I think Im going to replace the factory amp. Anyone know what years these were used? And are there different package options or are all of them the same?

[PalmHarbor]

Re: No sound after new head unit install :(

I have a used one . Interested?
misterphillip@me.com

[nimrod.sixty9]

Re: No sound after new head unit install :(

You have a PM

[flamingchicken]

Re: No sound after new head unit install :(

you ever figure this out bud?

[nimrod.sixty9]

Re: No sound after new head unit install :(

you ever figure this out bud?

Nope

I'm starting to think it's the factory amp. I snagged a factory head unit wire harness, I'll take a pic soon to see if someone could verify if it's the right one for my ride. I'll start with that first, if it's the right one. Then I'll move on to the amp. Hope I can find one cheap enough. Have any idea what years are compatible with a 98 camaro?

[flamingchicken]

Re: No sound after new head unit install :(

i have no clue...my car didnt come with the monsoon system, so i have never had to mess with any of that.

[michael454rs@hotmail.com]

Re: No sound after new head unit install :(

i have a spare one i can let it go for 20 plus shipping i really dont need it if youre interested pm.