subwoofer wireing questions.....

[Bonemaro]

Re: subwoofer wireing questions.....

Just like that diagram. pretend ch1+2 is your left + and - and ch 3+4 is your right + and -. Doesn't get much easier. Your amp has two channels, your sub has two voice coil. Hook one to one and the other to the other.

If your lucky, you might RMS 75-85 watts out of it.

[black95maro]

Re: subwoofer wireing questions.....

how would this turn out??? http://crutchfield.custhelp.com/rnt/...Ch_1-4ODVC.jpg


or what if i just bridged it and ran it like the first diagram that was posted?

[black95maro]

Re: subwoofer wireing questions.....

so is it possible for me to get that 450x1 at all and it still being safe?

[Bonemaro]

Re: subwoofer wireing questions.....

Not with that sub, no. At a one ohm load, that amp would thermo in minutes.

You would need a single voice coil 4 ohm sub to use this amp in a single channel configuration.

You could get do it with two DVC subs though.

[black95maro]

Re: subwoofer wireing questions.....

well that sucks can you help me with one more thing what is a cheap amp that can pump this sub good and put good wattage to it.......i dont have alot of money but can scrap up some

[black95maro]

Re: subwoofer wireing questions.....

and dude you have been a ton of help and i appriciate it alot...thanks

[Bonemaro]

Re: subwoofer wireing questions.....

No prob. I would almost just run it in 4 ohm stereo mode for now. Either that or look for a mono block sub amp that's 2 ohm stable. Something like RF's Punch P3001 would be nice. It would hit the P3 with an RMS 300 watts at a 2 ohm load. Nice, and you would keep it all RF.

http://www.onlinecarstereo.com/CarAu...roductID=14321


They have some other mono amps here...

http://www.onlinecarstereo.com/CarAu...x?CategoryID=1

[black95maro]

Re: subwoofer wireing questions.....

is there any possible MA audio amps that will work because i can get them for next to nothign a buddy of mine works there

[black95maro]

Re: subwoofer wireing questions.....

i can get any MA for 50 bucks so price doesnt matter

[Bonemaro]

Re: subwoofer wireing questions.....

Any of MA's HK series will work (they're all 1 ohm stable). The M1900EX is a 2 ohm mono block, which will work as well. Are these MA's as powerful as they boast? The smallest one is the HK398, which is claiming 1 x 600 watt at 2 ohm.

[Bonemaro]

Re: subwoofer wireing questions.....

i can get any MA for 50 bucks so price doesnt matter

Can you get me a few??? :cool:

[black95maro]

Re: subwoofer wireing questions.....

lol i dunno if they can live up to what they claim.....i can try if i can talk him into it but im not positive

[Bonemaro]

Re: subwoofer wireing questions.....

I say on that ten, try the HK398. Then parallel the sub into a two ohm load and bridge the amp into a 1 ohm load and you got it maxed. Even if 1 x 600 is max rated, you'll still net out fine for a single 10.

[black95maro]

Re: subwoofer wireing questions.....

ok my last question for ya can you post a diagram of how that would look cause it confuses me to even try to think of hwo it would lol

[black95maro]

Re: subwoofer wireing questions.....

and thanks again for everything