Tweet
for rear sway bar bushings? prothane?
-
2001 Camaro 3.8 A4
1991 3000GT VR4
2001 Mitsubishi Eclipse GS
-
Re: could i use 11/16 instead of 17mm
What ever works I use 9/16 all the time and 1/2 , as long as it fits snug and doesn't strip it.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine -
Re: could i use 11/16 instead of 17mm
i was talking about the bushing its self..... because they do not make a 17mm.. i ended up buying a 16mm and i am gonna have a machine shop hone it to 17mm2001 Camaro 3.8 A4
1991 3000GT VR4
2001 Mitsubishi Eclipse GS
Comment
-
Re: could i use 11/16 instead of 17mm
I have 17mm sockets in 1/2" all the way to from 10mm to 32mm.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: could i use 11/16 instead of 17mm
It's only 0.5mm difference. I'd imagine if you tighten it down enough, you should be just fine.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...2 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago
Comment