uneven rear end

[techsan23]

Re: uneven rear end

Definitely looks like the rubber isolator on the drivers side is missing. Sometimes you can twist the springs slightly when jacked up and get a hair of height adjustment out of them.

[Fondle]

Re: uneven rear end

are you sure you didnt put the stock spring back in the passenger side?

[jeffyp32]

Re: uneven rear end

are you sure you didnt put the stock spring back in the passenger side?

yeah im sure.

the only suspension mods i have are the shocks and springs, subframe connector and tower brace

[LETZRIDE]

Re: uneven rear end

how long ago were the subframe connectors welded in? if they were done about the same time, maybe you welded a twist into the chassies?

[Pewter02Camaro]

Re: uneven rear end

how long ago were the subframe connectors welded in? if they were done about the same time, maybe you welded a twist into the chassies?

Don't talk like that thats scary! :eek::eek::eek:

[LETZRIDE]

Re: uneven rear end

Don't talk like that thats scary! :eek::eek::eek:

well its possible...the suspension has to be loaded when you weld them in...if you weld them when they are on a lift or jackstands that support the chassies only, the car bends, and you weld that into place.

My exhaust guy was showing me once...he said older cars are alot worse at doing this, but if you measure the gap by the front fender/door area when the car is on the ground, and then use the lift to bring it off the ground and measure it again, that gap gets bigger.

So, if he had it done at the same time as the springs, and the problem was not there before, and the springs are the same size, and the perches are there, and it is seated correctly...it has to be an issue with the work just done...so it is a possibility

However, if he had the sfc in before and it was fine, then this wont be the issue...just tossing ideas out there...

[jeffyp32]

Re: uneven rear end

actually i have bolt ons so... no problem there unless i bolted them on too tight or something

[LETZRIDE]

Re: uneven rear end

have you checked for the rubber perches yet?

[jeffyp32]

Re: uneven rear end

yeah i have them both

[pace2006]

Re: uneven rear end

Have you driven it or even moved it out of that spot to see if it levels out? You might also notice some other effects while driving that could give us some more clues.

[jeffyp32]

Re: uneven rear end

yeah i drove it. its bumpy but thats about it

[vr4gasm]

Re: uneven rear end

take pics under your car for us each spring ect..

[jeffyp32]

Re: uneven rear end

i'll try. its been raining so not sure when i can get under there. but i'll have them up as soon at possible

[auto666]

Re: uneven rear end

how long ago were the subframe connectors welded in? if they were done about the same time, maybe you welded a twist into the chassies?

nice thinking