front end upgrade kinda - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

front end upgrade kinda

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: front end upgrade kinda

    Should I replace the inner tie rod ends while I'm in there or can I get away with just the outers?
    1997 Chevrolet Camaro
    L26, Pacesetter headers, SLP cai, Centerforce DF clutch, Pro 5.0 shifter, UMI short stick, 1le driveline, J&M 35mm front swaybar, UMI lca's/phb/sfc's, KYB AGX shocks, Hotchkis stb.

    Comment


    • #17
      Re: front end upgrade kinda

      I just replaced the outter ones, unless your inner tie rod is bent or something.
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

      Comment


      • #18
        Re: front end upgrade kinda

        Ok my tie rod ends are fine. I had my buddy turn the wheel back and forth while I was under the car and think that clunk is coming from my rag joint. I tightened the linkage that goes to the steering rack a little but it looks like 2 pieces of metal on the rag joint are banging together.
        1997 Chevrolet Camaro
        L26, Pacesetter headers, SLP cai, Centerforce DF clutch, Pro 5.0 shifter, UMI short stick, 1le driveline, J&M 35mm front swaybar, UMI lca's/phb/sfc's, KYB AGX shocks, Hotchkis stb.

        Comment


        • #19
          Re: front end upgrade kinda

          Rag joint as in lower ball joint? I forget what is a rag joint. LOL
          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
          96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

          Comment


          • #20
            Re: front end upgrade kinda

            No, no ball joint, the steering rag joint. I checked out the stickey about this and it mentioned this eliminator kit http://www.unbalancedengineering.com/Camaro/Rag_Joint/. Anyone use this before?
            1997 Chevrolet Camaro
            L26, Pacesetter headers, SLP cai, Centerforce DF clutch, Pro 5.0 shifter, UMI short stick, 1le driveline, J&M 35mm front swaybar, UMI lca's/phb/sfc's, KYB AGX shocks, Hotchkis stb.

            Comment

            Latest Topics

            Collapse

            FORUM SPONSORS

            Collapse
            Working...
            X