Should I nab these? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Should I nab these?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Should I nab these?

    I'm trying to reduce or eliminate how often my exhaust hits the car. I'm sure most of you saw my other posts in the exhaust section so I won't go over the whole story again. The long and short of it is that I want stiffer shocks than stock. I found these via ebay and they seem alright. What do you guys think?

    http://cgi.ebay.com/ebaymotors/RKSpo...03487820QQrdZ1

    And if I do get them, do I have to replace the front shocks too? Or can I leave them for now? Remember, I'm on a budget.
    01 V6 Firebird, Flowmaster catback, Navmate gps, B&M Ripper.

  • #2
    those seem cheap.. but i dont know anything about them. and yes, do all 4 shocks at the same time. even if youre on a budget.. save.. do all 4 at once.
    Dave:
    00 Supercharged Camaro - RIP
    97 Turbo Camaro - Sold

    Comment


    • #3
      "And if I do get them, do I have to replace the front shocks too?"

      Suspension is a system. If you don't get a set of four matched shocks that are compatible with your springs, you are liable to wind up with some really strange handling.

      If it were me, I'd call Sam Strano for advice, and I'd expect that I'd have to pay some money for a _good_ solution to my problem.
      2000 Firebird convert, chameleon/tan, M5, Y87, TCS, BMR tower brace and panhard, KBDD sfcs, 245/50-16 GSCs

      Comment


      • #4
        I dont think its the shocks that would make the exhuast hit the car... look into the mounting position.. but those are good shocks if you can get them cheap

        Comment

        Latest Topics

        Collapse

        • Dongrossmd
          Throttle Position Sensor trouble shooting
          by Dongrossmd
          I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
          3 weeks ago
        • ssms5411
          New stereo
          by ssms5411
          Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
          4 weeks ago

        FORUM SPONSORS

        Collapse
        Working...
        X