ABS motor pack - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

ABS motor pack

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ABS motor pack

    Ok guys. I found out why the abs inop light is coming on. the abs motor pack is bad. they're wanting 460 bucks to fix this. is there anyway i could do this myself, or would it just be best to swallow my pride and let them do it?

    thanks,
    bill
    Sold her. :( - 94 Bird, K&N filter, Flowmaster exhaust, WS6 Wheels with Dunlop sp5000\'s all around. Many mods to come. Not to mention 205,000 original miles!!<p>New Ride - White 01 WS-6 M6 (Direct-Flo airlid, flowmaster exhaust)

  • #2
    Just checking, but are you positive that it's a bad ABS unit. Two things that come to mind that will trip that light are a bad alternator, and a blown brake light (especially in the spoiler). Just a thought. I've had both trigger the ABS inop light in my Camaro
    1993 Camaro 3.4L A4 many mods comin for 2004<br /><br />\"The last thing I wanted was to get in a fight in Jackson, Mississippi on a Saturday night\"

    Comment


    • #3
      yeh. i'm sure that's not it. i've heard of those, but i just changed my alt and replaced all blown bulbs. plus, the abs is indeed inop. [img]smile.gif[/img] plenty of rubber on the road verifies that. [img]smile.gif[/img] the computer told the story. it was the pack, at least i hope. thanks though. [img]smile.gif[/img]

      later on bud,
      bill
      Sold her. :( - 94 Bird, K&N filter, Flowmaster exhaust, WS6 Wheels with Dunlop sp5000\'s all around. Many mods to come. Not to mention 205,000 original miles!!<p>New Ride - White 01 WS-6 M6 (Direct-Flo airlid, flowmaster exhaust)

      Comment


      • #4
        You could always buy a used one from a camaro/firebird junkyard - it surely won't cost so much... Simply replace it yourself and bleed the system?
        2002 5-spd NBM Camaro
        Details: www.1lev6.com

        Comment


        • #5
          how hard of a job is it to do it yourself? my haynes manual doesn't tell how to do it so i got skeerd. [img]smile.gif[/img]
          Sold her. :( - 94 Bird, K&N filter, Flowmaster exhaust, WS6 Wheels with Dunlop sp5000\'s all around. Many mods to come. Not to mention 205,000 original miles!!<p>New Ride - White 01 WS-6 M6 (Direct-Flo airlid, flowmaster exhaust)

          Comment


          • #6
            Well getting brake fluid over everything isn't fun, it will quickly eat through your paint and thats not cool. Aside from that, its as simple as turning a few screws, draining the block, disconnecting all the lines, and installing the new one... Then of course bleeding the entire system.

            I would imagine it would take a good 6hours to do since its pretty time consuming - although it isn't very "difficult".
            2002 5-spd NBM Camaro
            Details: www.1lev6.com

            Comment


            • #7
              sounds like a job for the service center. [img]smile.gif[/img]
              Sold her. :( - 94 Bird, K&N filter, Flowmaster exhaust, WS6 Wheels with Dunlop sp5000\'s all around. Many mods to come. Not to mention 205,000 original miles!!<p>New Ride - White 01 WS-6 M6 (Direct-Flo airlid, flowmaster exhaust)

              Comment

              Latest Topics

              Collapse

              FORUM SPONSORS

              Collapse
              Working...
              X