Tweet
I just bought a 32mm front and 19mm rear sway bar and was wondering what all I needed for install. Obviously will need new bushings for the bigger bars, but would I need just the bushings, or the bracket that mounts them too, or can I reuse the old one? Also will I need new endlinks and what length endlinks would I need?
-
-
Re: Bought new sway bars
the universal endlinks should work well for you on the front. your going to need 1.5 inch spacers on the rear endlinks you can just buy a set of univeral links and cut them to size and buy the right size bolts. for the bushings go with the grease able poly bushingsfor front and rear.
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment