Tweet
Sad to say at this moment I can only really afford to do a little better than stock componets (no new sway bars etc.) My car does have 100K now, so i figure its about time for some new parts. Im going with poly graphite bushings for a little bit of an upgrade. Check out my list to see if im missing anything please...
sway bar bushings/endlinks
upper/lower ball joints
control arm bushings upper lower
wheel bearings (all 4)
v8 takeoff decarbons (front and rear)
what bushings will i need for the rear? And if i missed anything major up front PLEASE let me know. Id like to get everything thats really needed in on fail swoop. Im keeping my stock springs because i cant lower my RS here with these roads in Louisiana or Id be missing all my ground effects. Plus they got that 100K sag and that gives it a nice stance with no adverse affect on spring rate. Thanks alot!
sway bar bushings/endlinks
upper/lower ball joints
control arm bushings upper lower
wheel bearings (all 4)
v8 takeoff decarbons (front and rear)
what bushings will i need for the rear? And if i missed anything major up front PLEASE let me know. Id like to get everything thats really needed in on fail swoop. Im keeping my stock springs because i cant lower my RS here with these roads in Louisiana or Id be missing all my ground effects. Plus they got that 100K sag and that gives it a nice stance with no adverse affect on spring rate. Thanks alot!
Comment