Tweet
I'm getting ready here in the next day or so to replace my rear springs with SLP V8 t/o. I was wondering if there's anything specific I need to know or any tips on doing this.
-
Proud Member of the Fightin Texas Aggie Class of 2004! WHOOP! -
1. Jack car up in rear and put jackstands on frame to hold it up.
2. Put Hydraulic Jack under axle (one at a time) and jack up the rear about 10" and unbolt lower shock bolt.
3. Pull shock bolt out of rear housing and let rear down slowly.
4. Watch out for falling spring(s)
Reverse for install
-Marcsigpic
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...3 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...3 weeks ago
Comment