Tweet
put 1LE sway bars and poly bushings and endlinks this past weekend and have a few squeaks, where all do i need to grease... everything?? thanks
merlin
merlin
-
2002 Firebird<br />2003 Yamaha YZF 600R -
i didnt get to many squeaks after i put mine on.... i only greased the bushings in the middle, i didnt touch the endlinks at all.,.- \"So you have something to look at when you\'re talking to \'em\" - <br /> <a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=296916\" target=\"_blank\">http://www.cardomain.com/member_pages/view_page.pl?page_id=296916</a> -
After being under my car a number of times freasing the bushings, I will tell you it's definatley a pain in the arse. Do it right with marine grade lubricant. Marine grade, because it's waterproof. If you use a grease that isn't waterproof, your sqeaks will come back in a few weeks or until it rains agian.2002 M5 Camaro 3800<br />1LE Sway Bars<br />Hurst Billet Plus Shifter<br />3.23\'s<br />Ghetto Whisper Lid Mod<br />Ghetto Ram Air Mod<br />Taylor Wires<br />Holly Powershot FilterComment
-
When you assemble the new endlinks you need to grease any bushing where it touches another part at bare minimum. If you have excess grease don't worry about it, just squish it around and let it hang there - it will protect the grease in the bushings doing the work [img]smile.gif[/img] .
I greased my endlinks, they seriously needed it. The rubber bushings I'm using didn't need grease since they're rubber.2002 5-spd NBM Camaro
Details: www.1lev6.comComment
-
thanks for ya'lls help...
merlin2002 Firebird<br />2003 Yamaha YZF 600RComment
Comment