BMR strut tower brace

[bustacap54]

finally got it in, but had a little problem, the tanny dip stick is in the way, and i can't get it in all the way, can i bend the tub a little up or down without damaging anything?

thanks,

[Dan M]

The tranny dipstick is in the way? Can you take pictures? Which side is it on? The only thing I had to move was a metal bracket attached to an AC (?) line so that I could bolt up the bar.

[1htv6]

I've never heard of this, anybody else have this problem?

[Pewter2K1]

mine fits, a little tight, but you can do it, just when you need to pull the stick you have to push it p a bit above the STB... not a big problem.

[John D.]

<blockquote>quote:</font><hr>Originally posted by DrSquirts:
The tranny dipstick is in the way? Can you take pictures? Which side is it on? The only thing I had to move was a metal bracket attached to an AC (?) line so that I could bolt up the bar.<hr></blockquote>

What he said.

[bustacap54]

I'll try to take pictures when i get home tonight, i thought this was a bit wierd, the dip stick is on the passenger side almost right about the oil fill cap.

[ March 25, 2002: Message edited by: bustacap54 ]</p>

[DeathBuzzz]

Is the tranny dipstick tube in the way of the STB of the STB in the way of the dipstick. I cant get my tranny dipstick out very well with the STB in place. The STB is easy to take off though, maybe a max of 10 mins. I just take it off to check and or change the fluid in the tranny. But if its the tube in the way of the STB then I have never heard of that.

~Brian

[ March 25, 2002: Message edited by: DeathBuzzz ]</p>