Does those exist for ours cars?
Announcement
Collapse
No announcement yet.
Height adjustable rear shocks?
Collapse
X
-
-
Normal shocks don't control ride height, springs do.
- Justin<a href=\"http://www.njfboa.org\" target=\"_blank\">New Jersey F-Body Owners Association</a><br />1987 Camaro LT - 400sbc, Aluminum L98\'s w/valve job, Comp XE 274, Q-Junk 750, 3.23 posi, 4.10\'s soon.<br /><br /><a href=\"http://www.njfboa.org/forums/viewforum.php?f=11\" target=\"_blank\">East Coast F-Body Nationals - August 14, 2005</a>
Comment
-
Since we don't have a coil-over setup in the back, Tru's right, shocks alone won't do it.
A spring perch kit like Ground Control or others make will allow for adjustability. Note that these won't wor with stock springs unless you want to go higher than stock, since they have a minimum clearance they raise the spring by.
-JeffDrivetrain Moderator - "There are no stupid questions, only stupid people!"
2001 Pewter Firebird Y87, M5
Intake, exhaust, just about every suspension part, alum flywheel & ds, Turn One p/s pump and cooler
Go Sabres!
Comment
-
Springs for the GC kit are typically sold separate, since they use a standard size spring which lets people specify the rate they want (and linear vs progressive rates).
I have the kit on my car, with 400/150 springs (I think), revalved Bilstein HD's in the front and 3rd gen Bilstein HD's in the rear.
If you're just adding the GC and new springs to the rear, not even bothering with shocks, you can plug them in about 15 minutes I'd guess. Jack the rear by the frame and you can just pop out the old springs and pop the new ones in, don't have to unbolt anything. One more lower and lift to get the ride height adjusted the way you want.Drivetrain Moderator - "There are no stupid questions, only stupid people!"
2001 Pewter Firebird Y87, M5
Intake, exhaust, just about every suspension part, alum flywheel & ds, Turn One p/s pump and cooler
Go Sabres!
Comment
Latest Topics
Collapse
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 days ago
-
by ssms5411Getting a massage saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...5 days ago
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.1 week ago
-
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...1 week ago
Comment