Rear brake rattle..

[y87inside]

Anyone ever have a problem with rear brake pad rattle? Is there a shim i forgot to reinstall? The clips springs on top are just really loose. this problem is only on the drivers side rear. All the other brakes are fine

[hockeyman]

Are you sure it's the pads and not the caliper or it's mount?
If the pads are loose, maybe the caliper piston is stuck in the "open" position. Re-bleed the system. If that doesn't work, try rebuilding the caliper. I don't recall seeing any shims when I rebuilt my calipers and put new pads in a few years back, but I could be wrong. Unless, it's listed here are part #17.
Anything with the caliper housing or mount is basically easy; just re-tighten the bolts.

[y87inside]

Im positive that the calipers are tight and not sticking. If im going over a rough road you can here the pads rattling in their bracket. When I apply the brakes all the noise stops because the friction between the rotor and pads are causing the pads to sit tight against their bracket when the brakes are applied. I think im gonna just try a new set of pads in the rear.