Tweet
I'm planning on getting 17" z06 wheels and putting 245/40/17 on the front and 275/40/17 on the back. I am also probably going to lower the car 1.75". Should that all fit properly without rub or anything?
-
Metallic Navy Blue \'98 Firebird A4<br />Free Ram Air, 2.5\" Magnaflow Exhaust, Custom Tune<br />15.43 @ 87.8 -
As long as you get wheel fitments designed for the Fbody, ie. around 56mm offset.
I wouldn't put a 245 on a 9.5" wide wheel, it'll look too narrow.
If you're getting the 17/18" staggered wheels they are usually a 8.5" front and 9.5" rear. Then you could do a 245/45R17 and 275/35R181994 Firebird 3.4<br />15.65 @ 86.8<br /><a href=\"http://www.funkz.net/firebird.htm\" target=\"_blank\">funkz.net/firebird</a><br /><a href=\"http://mywebpages.comcast.net/funkz/timeslips.htm\" target=\"_blank\">Timeslips</a> -
x2Originally posted by FunkZ:
As long as you get wheel fitments designed for the Fbody, ie. around 56mm offset.
I wouldn't put a 245 on a 9.5" wide wheel, it'll look too narrow.
If you're getting the 17/18" staggered wheels they are usually a 8.5" front and 9.5" rear. Then you could do a 245/45R17 and 275/35R18
I would also like to add that I had to get an adjustable PHB and grind off my rear bumpstops.
I mean I didn't HAVE to grind them off, but for piece of mind that my PHB with loctite in it comes undone and my tire rubs at 70+mph.Comment
Comment