Brake Issues

[Mikey]

Hey guys,
The problem is when I push my brake pedal at freeway speeds my pedal does not come up for a few seconds, its like my foots still on it. I have ABS, but the light is not on for a malfunction. Also I have drilled/slotted rotors, but just started having the problem...a good 5k since theyve been on. I tried bleeding the brakes, that didnt seem to help. Any I deas? Do I need to use my hand pump to bleed the brakes better maybe? Any help would be awesome its driving me crazy.
-Mikey

[Rob Bell]

Man, that sounds really dangerous. I have no clue what it is, but if you cannot figure it out, get it someplace and get it fixed quick.

[BLLDOGG]

does the pedal not come up or your brakes not disengage? if its not disengaging, i would suspect the gasket on the pistons that pulls the pistons back or a "flapper" in the lines that would restrict back flow. Are you having problems engaging the brakes like having to push farther than normal to apply them?

[ November 19, 2005, 04:04 PM: Message edited by: BLLDOGG ]

[kristen]

bleed bleed and bleed again. just the tinyest bit of arm in those lines will make a big difference. also you can try to switch to steel braded break line.

[Mikey]

I can try bleeding them again I guess. They apply just fine, just the pedal does not return to the nuetral position unless I pull it up at freeway speeds.

[BLLDOGG]

so they are disengaging just fine but the pedal isnt?

[Mikey]

No the pedal along with the brakes do not disengage.