Tweet
Will all suspension parts from 82-02 Camaro TPI,LT1,LS1 engines work on a 3800. I was looking on ebay earlier and it said 82-02 Camaro LT1,TPI,LS1 but didn't say V6. As for suspension components I'm referring to subframe connectors, lowering springs, pan hard rods, lower control arms etc.
-
2000 Camaro, Pewter Metallic, M5 tranny, 3.23 gears, Hard Top, <br /><br />Modifications:<br />SLP loudmouth (dual/dual tips)<br />MSD 8.5mm wires<br />K&N airfilter<br />SS hood (don\'t buy from fiberglassfabricators.com!!!)<br />Spec stage 2 clutch -
Rear suspension parts are interchangable 82-02 but for front springs/shocks you will want 93-02. Third gens had a different setup.1994 Firebird 3.4<br />15.65 @ 86.8<br /><a href=\"http://www.funkz.net/firebird.htm\" target=\"_blank\">funkz.net/firebird</a><br /><a href=\"http://mywebpages.comcast.net/funkz/timeslips.htm\" target=\"_blank\">Timeslips</a> -
v8 and v6 springs are different
Comment
-
Thanks all, so subframe connectors, and LCA's should bolt right up?2000 Camaro, Pewter Metallic, M5 tranny, 3.23 gears, Hard Top, <br /><br />Modifications:<br />SLP loudmouth (dual/dual tips)<br />MSD 8.5mm wires<br />K&N airfilter<br />SS hood (don\'t buy from fiberglassfabricators.com!!!)<br />Spec stage 2 clutchComment
-
yes2002 Pewter V6 Camaro M5 <br /><br />Quickest stock-motor N/A V6 4th Gen F-body.<br />2nd Quickest N/A V6 4th Gen F-body overall.<br />mods: Gear, weight reduction, tuning <br /><br />Fear the Gear. 13.585 @ 100.05 1.827 60\'<br /><br /><br /><a href=\"http://www.NJFBOA.org\" target=\"_blank\">www.NJFBOA.org</a>Comment
-
if you get v8 springs up front wont your car be higher off of the ground rather than if you get v6 springs?99 WS6
13.25@104.97 - Lid + soon to be more other stock items ;D
Originally posted by camaroextraComment
-
I would like to know this too. I'm scraping my turbo pipes everywhere and I want to raise the front end of the car up a bit so it wont scrape as much.Originally posted by shock_core:
if you get v8 springs up front wont your car be higher off of the ground rather than if you get v6 springs?1997 Camaro Y87. Turbo.<br /><a href=\"http://pureoctaneracing.net/\" target=\"_blank\">Pure Octane Racing</a>Comment
-
Slightly, only ¼ - ½ inch or so. Depends on the spring rate.1994 Firebird 3.4<br />15.65 @ 86.8<br /><a href=\"http://www.funkz.net/firebird.htm\" target=\"_blank\">funkz.net/firebird</a><br /><a href=\"http://mywebpages.comcast.net/funkz/timeslips.htm\" target=\"_blank\">Timeslips</a>Comment
-
Strut bar brace is different from normal Z28, unless its a universal one which it will say.2001 V6 Camaro - VTEC Badged, Abbott Racing Heads Sticker, and Loud A$$ Exhaust<br /><br /><b>BUILT NOT BOUGHT</b><br /><br />14.0 @ 96.44 MPH (Street Tires, Before Tranny)<br /><br /> <a href=\"http://members.cardomain.com/6pakcamaro54\" target=\"_blank\">http://members.cardomain.com/6pakcamaro54</a>Comment
Comment