BMR strut tower brace install problems...

[MustangEater8251]

Before you guys think I am an idiot, let me explain.

Did any of you guys have any trouble with the passenger side and the AC valve pressure sensor and clearance with the STB? I took off the senor and still had trouble clearring it and no way in hell would every be able to get it back on I had to bend the lines a little, and bend the bracket to the AC evaporator?(I know very very little about AC) EIther way I have it in now, but not a very easy install, well not as easy as it should be took me about 30 min.

Is my ac sensor in a bad spot or are all you guys having similar problems?

[TealV6]

Your problem is normal. Making a product for 2 different cars is tough, but it did fit with just some gentle moving of lines ;)

I had the same issues, don't sweat it.

Steve

[SixVi6-Camaro]

same thing here. ya just have to bend the lines a bit. it won't hurt anything. I was more concerned how the BMR STB on my 3.4 is tight against the throttle and TV cables over the intake. but I've had no problems wiht it.

[MustangEater8251]

hmm... I was jsut wondering I ahd some stuff replaced on my ac thought maybe the valve moved and caused some issues.