V8 H&R Springs on my 94-V6

[whiteThunder]

i have an opportunity to buy a set of H&R lowering springs off my friend , but they are for a Z28. My question is that i only want a drop of like 1", and these are advertised to drop like 1.25" -1.50" on a V8. so:
1. Will these work, both are 93-97 applications.
2. will the difference between motor weight (my 3.4 less) cause my car to sit higher, and only dorp like 1" or so.
3. i want a cheap spring upgrade from my stockers, with a little drop,but not much because the WW Ground Effects will be low enough?
What are your thoughts.

[FunkZ]

Rear should drop the advertised amount, but the front will not due to the weight difference. It will still drop some. I put SS springs (advertised 1" drop) on my 3.4 and the front only came down 1/4" but the rear dropped the full inch.

No difference in fitment otherwise between V6 and V8 springs.

[whiteThunder]

Thanks, i don't want my front to drop anyway, just the back so it sits nice on the wheels. The front will have that nice big wings west spoiler.