Tweet
There was an awesome install guide with tool list and all that someone posted a long time ago on how to install a y87 rack. I searched and came up empty-handed. I'd appreciate the help.
-
<b> \'95 Camaro 3.4L A4 <i>Rikku</i><br />AutoX - Drift - Street </b><br />\"Sideways is faster.\" -
pretty simple don't really need any special tools. Just unbolt the stearing colom from the rack. Unhook the power stearing pump lines. Unbolt the tie rod ends from the spindle. Unbolt the rack from the car and slide it right out. Reverse porcess for instalation. -
Also, dont forget putting fluid in. ;) The fluid/bleeding process is pretty simple itself. Just fill the reservoir to the top, and the start the car, and start turning the steering wheel from lock-lock, and repeat many times, checking and adding fluid about every 5 times. Ive installed one in a 'maro before.
[ January 21, 2005, 11:51 AM: Message edited by: 93camaro_zzz ]Jordan<br />15.09@90.7<br /><a href=\"http://www.fullthrottlev6.com/forums/vbgarage.php?do=view&id=21\" target=\"_blank\"><b>1995 Camaro 3.4 M5</b></a>Comment
-
Seems like I had to loosen the a/c compressor on my 98 to get one of the bolts out.\'98 A4 Camaro v6->v8 conversion, and STS kit next<br />v6: 13.6 Powerdyne, 13.2 150 shot, 13.8 120 shot, 14.3 85 shot, 15.7 stock<br />v8(na): 12.18@113, 392rwhp<br />Moderator on <a href=\"http://www.mtfba.org\" target=\"_blank\">www.mtfba.org</a> and <a href=\"http://www.frrax.com\" target=\"_blank\">www.frrax.com</a> (Road Race & Autocross)<br /><a href=\"http://community.webshots.com/user/johnduncan10\" target=\"_blank\">Car pics</a>, <a href=\"http://www.trscca.com\" target=\"_blank\">TN Region SCCA</a>Comment
Comment