Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
My car always looked a lot lower then other camaros. I thought the shocks were shot but the shocks don't have anything to do with holding the back end up do they? Thats the springs job, which let me to beleive that the kid that had the car before me lowered the *** end a bit? How can I tell if it was lowered or not by the springs, etc... I'm not really feeling the whole car being lowered thing. Any help would greatly be appreciated.
Measure it and let us know. It should be roughly 27-28 inches to the highest part of the wheel well. I'm talking about the body, not the inner wheel well.
Keith - 99 'maro - White M5 - bumpstick and boltons - 13.65 @ 101 N/A
"I ain't too big to listen to the rumors, I'm just too @#$% big to pay attention to them" - Dr. Dre http://seppo.hopto.org/
look at the springs. stock springs are black and have a texture to them. usually they have a yellow sticker tag on them too. thats assuming they havent been cut ;)
\'01 TA with boltons, cam <b>11.28@119.72 (1.49)</b><br />\'97 Tahoe LT 4x4- stock
I've always noticed that base V6 Camaros look lower that other camaros. The RS's also look lower than the current Camaros with the "sport appearance package".
1999 Pewter Camaro M5<br />Y87 Performance Package, Sport Appearance Package, Diamond Clears<br />Factory SS Hood, Free Ram Air Mod, Whisper Lid w/ K&N Air Filter<br />CarSound Cat 94009, B&B Tri-Flo w/ Quad Tips<br />BMR SFC, BMR STB, KVR Blank Rotors, Hawk HPS Pads<br />Black Painted Calipers w/ CAMARO Decal, 245/50 Dunlop SP Sport 5000<br />20% Rear 35% Side Tint, Red Reflective Inlays, Invincishield<br /><b>Young girls avert their eyes, weak men tremble, Ford dealers faint.</b>
Ok I measured the height of the top wheel well to the ground on a flat surface and I came up with 27 1/8 inches. For all sides. I looked at the springs and they are black but have a white tag on them, maybee the tag faded from yellow to white over the years. The tires are P215/60R16. But the cars back definatley looks lower then most camaros I have parked it next too. Even 6cyls i've compared it too have more space between the tire and the top wheel well. I've thought it could be the size of tire thats on there maybee? I don't know too much about tires but i've also rememered something just now. I think my car could have been an RS before. I ran the VIN # before and every place says it's an RS, when I bought the car it had no emblems on it except for the front nose badge and it almost looks like under the front fenders theres a place to attatch something there that I haven't noticed on other camaros. I honestly don't know, I just know that every camaro I see looks a lot higher then mine. I definatley want it to look like all the other camaros and not have the *** end sag down. What should I do?
Thats high enough to be considered not lowered. Assuming the stock shocks are still on the rear, replacing them might raise the car alittle: 1/4 or 1/2 inch. You can get Takeoff v8 shocks for like 25 buck from slp.
My brother changed from stock to eibach springs and bilstien shocks in the rear and it went from 27 3/4 to 26 3/4.
I hope this helps some.
Keith - 99 'maro - White M5 - bumpstick and boltons - 13.65 @ 101 N/A
"I ain't too big to listen to the rumors, I'm just too @#$% big to pay attention to them" - Dr. Dre http://seppo.hopto.org/
Haven’t done anything on the Camaro, but put LEDs on my truck headlights . And my oil pressure sensor went out on the truck so going to fix that this...
Haven’t done anything on the Camaro, but put LEDs on my truck headlights . And my oil pressure sensor went out on the truck so going to fix that this...
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment