Could this weaken the front end? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Could this weaken the front end?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Could this weaken the front end?

    Notching the lower A-arm nub that sticks out in the engine bay?

    here's the delima:

    Shot 1

    Shot 2

    These are the tubular eahaust manifolds off of a 2000 F-body 3800 car. It rests on the support, but I'm also thinking about the exhaust pipe, cornering, and just the normal engine vibration from idling/running.

    Car will not see any autocross but will be my daily driver.

    Thanks in advance.


    fwiw, it is a thirdgen car [img]graemlins/stickpoke.gif[/img]
    1978 Formula 461 in progress of being built :rock:
    2013 Ram 1500 Big Horn

    former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
    94 comero 3.4

Latest Topics

Collapse

  • Dongrossmd
    Throttle Position Sensor trouble shooting
    by Dongrossmd
    I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
    2 weeks ago
  • ssms5411
    New stereo
    by ssms5411
    Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
    2 weeks ago

FORUM SPONSORS

Collapse
Working...
X