HELP! How do I get my rotors off? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

HELP! How do I get my rotors off?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HELP! How do I get my rotors off?

    I've been beating and banging on my rotors for a half an hour and they will not budge. My cars a 2002 so there isn't a whole lot of rust on the rotors I have on there currently. Am I missing something?
    2002 Camaro RS, SLP CAI, 80 Series Flowmaster, Whisper Lid, K & N Air Filter, Hotchkis STB, Hurst Competition Plus Shifter, Lou\'s Short Stick, Slotted/Cross Drilled Rotors, Kenwood Excelon KDC-X569, Viper Alarm System. 35% Tint all around

  • #2
    Is the caliper off?
    New:04 GMC Sierra 1500 RCLB 4x4 5.3 GU80 3.73\'s.<br />Truck pics<br />Mods<br />Go fast: Panel K&N filter and soon SS truck catback.<br />Appearance: Stull Billet grill,Weston Chrome step tubes,Rhino Chrome hitch step,ARE painted fiberglass cover,Silver star lighting.

    Comment


    • #3
      Yes, the caliper is off.
      2002 Camaro RS, SLP CAI, 80 Series Flowmaster, Whisper Lid, K & N Air Filter, Hotchkis STB, Hurst Competition Plus Shifter, Lou\'s Short Stick, Slotted/Cross Drilled Rotors, Kenwood Excelon KDC-X569, Viper Alarm System. 35% Tint all around

      Comment


      • #4
        Originally posted by *****inRS:
        Yes, the caliper is off.
        LOL
        New:04 GMC Sierra 1500 RCLB 4x4 5.3 GU80 3.73\'s.<br />Truck pics<br />Mods<br />Go fast: Panel K&N filter and soon SS truck catback.<br />Appearance: Stull Billet grill,Weston Chrome step tubes,Rhino Chrome hitch step,ARE painted fiberglass cover,Silver star lighting.

        Comment


        • #5
          Originally posted by *****inRS:
          I've been beating and banging on my rotors for a half an hour and they will not budge. My cars a 2002 so there isn't a whole lot of rust on the rotors I have on there currently. Am I missing something?
          I had the same problem with the passenger side rear.

          Take a metal bar and lay it across the hub between the bolts. Then take 2 c-clamps and put one side of the clamp on the bar and the other on the axle. Tighten them very slowly. When mine popped off the axle it sounded like a gunshot.
          <a href=\"http://members.cox.net/95batmobile/d86f.jpg\" target=\"_blank\">Sinister Six</a> <br /><b><a href=\"http://www.cardomain.com/id/c_o_jones\" target=\"_blank\">Cardomain</a></b><br />--This doesn\'t change the fact that I am ~The Guru~ who still kicks puppies...

          Comment


          • #6
            If you have the calipers off... spray some liquid wrench or other rust cutter, wait a bit, and take a rubber faced hammer and slap the back of the rotor, should pop right out.
            <a href=\"http://www.cardomain.com/id/kefkafloyd\" target=\"_blank\">http://www.cardomain.com/id/kefkafloyd</a> <br />Red 1997 Pontiac Firebird 3.8L A4 w/ Y87

            Comment


            • #7
              Can also smack the **** out of them with a rubber mallet (in the middle not the sides lol). Thats how we had to get some of them off at work.
              00\' firebird v6 5spd<br />201rwhp ---- 230 rwtq<br />\"Everyday I grow stronger...and further from you.\"<br />WARNING: Do not take any of my comments seriously unless they are technical in nature and then only at your own risk

              Comment


              • #8
                i kicked mine and it it hit me in the shin but it came off
                www.turbov6camaro.com
                1997 3800 Series II Camaro
                4600 Stall for my ride to the mall :chug:
                7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
                11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

                Comment


                • #9
                  Figured it out... 98 and up have to remove the e-brake cable. As soon as I did that they slipped right off. Thanks for the suggestions.
                  2002 Camaro RS, SLP CAI, 80 Series Flowmaster, Whisper Lid, K & N Air Filter, Hotchkis STB, Hurst Competition Plus Shifter, Lou\'s Short Stick, Slotted/Cross Drilled Rotors, Kenwood Excelon KDC-X569, Viper Alarm System. 35% Tint all around

                  Comment


                  • #10
                    Originally posted by *****inRS:
                    Figured it out... 98 and up have to remove the e-brake cable. As soon as I did that they slipped right off. Thanks for the suggestions.
                    Hmm, that seemed obvious, didn't it? Silly 98 cars and their... fancy e-brake [img]tongue.gif[/img]
                    <a href=\"http://www.cardomain.com/id/kefkafloyd\" target=\"_blank\">http://www.cardomain.com/id/kefkafloyd</a> <br />Red 1997 Pontiac Firebird 3.8L A4 w/ Y87

                    Comment

                    Latest Topics

                    Collapse

                    FORUM SPONSORS

                    Collapse
                    Working...
                    X