Who makes the best brakes for our cars? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Who makes the best brakes for our cars?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Who makes the best brakes for our cars?

    As the topic said, Bottom line, I am looking for new front rotors and pads, and I want the best, or damn close, and does any company make rear disk brake conversion kits or should I jsut go to a junk yard and get everything?

    By the way, I have a 1996 Camaro, and someday, I want to stop on a dime ;)

  • #2
    don't get HAWK pads!!

    squeeky like a mother and love to dust..

    i'm so upset
    \'96 <b>Quasar Blue</b> Firebird A4<br /><a href=\"http://jamiethekiller@comcast.net\" target=\"_blank\"><i>jamiethekiller@comcast.net</i></a><br /><a href=\"http://www.woodlandrock.com\" target=\"_blank\">my band: woodland</a>

    Comment


    • #3
      <blockquote>quote:</font><hr>Originally posted by Ryan W.:
      As the topic said, Bottom line, I am looking for new front rotors and pads, and I want the best, or damn close, and does any company make rear disk brake conversion kits or should I jsut go to a junk yard and get everything?

      By the way, I have a 1996 Camaro, and someday, I want to stop on a dime ;)
      <hr></blockquote> BAER
      2000 Firebird. Whisper Lid, True duals, TSP mail order tune, Built Tranny , TCI 2800 stall verter, B&M tranny cooler, Eaton LSD, 3.42 gears. Current best ET. 15.232 89.09 MPH 2.175 60ft on stock 3.42\'s and open diff.<a href=\"http://www.geocities.c

      Comment


      • #4
        I'm sure Brembo makes a kit for our cars ;)
        <b><a href=\"http://members.cox.net/95batmobile/d86f.jpg\" target=\"_blank\">Sinister Six©</b></a><br /><a href=\"http://www.sounddomain.com/id/95batmobile\" target=\"_blank\">My \'95 Bird</a><br />I am not afraid of storms, for I am learning how to sail my ship.

        Comment


        • #5
          <blockquote>quote:</font><hr>Originally posted by jamie:
          don't get HAWK pads!!

          squeeky like a mother and love to dust..

          i'm so upset
          <hr></blockquote>

          agreed! They were supposed to give off alot less brake dust than stock (as stated in their ad), but turned out they gave off as much as raybestos pads...which is ALOT!

          -Marc
          sigpic

          Comment


          • #6
            Autozone or Brembo blanks (tirerack), and EBC greenstuffs. Low dust, good stopping, and low cost..
            Drivetrain Moderator - "There are no stupid questions, only stupid people!"

            2001 Pewter Firebird Y87, M5
            Intake, exhaust, just about every suspension part, alum flywheel & ds, Turn One p/s pump and cooler

            Go Sabres!

            Comment


            • #7
              thanks fella, I really want low brake dust, to keep my wheels shinney jsut a bit longer [img]smile.gif[/img] Your info really helped becasue I had gotten a price on hawk pads, I think maybe I will check out Brembo, becasue I heard they are top of the line..

              Also, what kind of rotors are the best, what make, and should I get cross drilled, slotted, or jsut regualr ol vented rotors?

              Comment


              • #8
                you want the absolute best, no questions asked?

                Wilwood makes a 6-piston caliper setup for 93-97 f-body cars, and i think for everything you need, its about 1300.

                oh yea, thats just for the front ones......haha.


                from what i have seen, Baer has nice kits, and for like $500 you can get some 4-piston calipers, cryo-treated rotors, and pads and all the other **** like braided steel lines.

                Comment


                • #9
                  the best...or damn close...haha.....right now I am in need of rotors and pads, When it comes time that the calipers are ****ed up, I will get a good set of them too

                  Comment


                  • #10
                    Yes, Wilwood is good stuff too, but I thought their brakes were like drag racing only and stuff? My dad has some of their brakes for his 55 big window truck.

                    If you want cheap stuff, I got my rotors and pads for about $250 from fasttoys. The KVR cross drilled rotors with cadmium plating and carbon Fibre pads... I get no brake dust now.

                    I use to have dirty rims like 3 days after I'd clean them because my pads/rotors were so tore up, but now my rims stay clean for weeks :D

                    They don't stop nearly as good as a set of Brembo brakes would though... Brembo is the best. I think Brembo is on mercedes... ferarri... lambo...
                    <b><a href=\"http://members.cox.net/95batmobile/d86f.jpg\" target=\"_blank\">Sinister Six©</b></a><br /><a href=\"http://www.sounddomain.com/id/95batmobile\" target=\"_blank\">My \'95 Bird</a><br />I am not afraid of storms, for I am learning how to sail my ship.

                    Comment


                    • #11
                      I think Brembo is on mercedes... ferarri... lambo...[/QB][/QUOTE]
                      Porsche, Lotus, Aston Martin.....and several race cars. But for the money Baer is among the best in the business. Baer also has a 6 piston caliper set up but it is much more expensive than $1300..
                      2000 Firebird. Whisper Lid, True duals, TSP mail order tune, Built Tranny , TCI 2800 stall verter, B&M tranny cooler, Eaton LSD, 3.42 gears. Current best ET. 15.232 89.09 MPH 2.175 60ft on stock 3.42\'s and open diff.<a href=\"http://www.geocities.c

                      Comment


                      • #12
                        i like the brake pads i get from bennett auto supply.

                        i believe they are ceramix brake pads..

                        they only barely squeek in water.. and i get VERY VERY LITTLE brake dust
                        96 Camaro M5. Dark metallic gree (?dont know the offical color name)<br />Home made Intake :: Headers, 3inch headers back to Flowmaster muffler :: spec stage 3 clutch Now installed, waiting for 3.42\'s and LSD next month<br /><a href=\"http://photobucket.com/albums/y192/RiceEatingCamaro/?action=view&current=newcar.jpg\" target=\"_blank\">My Car</a> <br /><br />Totalled Car.<br /><a href=\"http://bellsouthpwp.net/s/k/sk8er305/\" target=\"_blank\">96 CamaroRS</a>

                        Comment


                        • #13
                          BAER Alcon 4. Costs about 1300 for fronts and 800 for rear Baer Alcon 2

                          Comment

                          Latest Topics

                          Collapse

                          FORUM SPONSORS

                          Collapse
                          Working...
                          X