Tweet
Is it possiable to remove tubular BM&R SFC from a camaro 02. I think the passenger side was not welded correctly and I wanted to fix. If u cut the welds out I know some of the original plate is gona get messed up but can I just get some flat bar or 3/16 plate to use. I thank you for your time.
-
member.cardomain.com/gman211203 -
Get yourself a portable grinder, and go to work. No other (easier) way to cut welds.sigpic -
Originally posted by hockeyman:
Get yourself a portable grinder, and go to work. No other (easier) way to cut welds.Comment
-
thanks I know how to remove them, My question was asking will The SFC be damaged so I cant reuse them and will the frame get tweeked or damaged from cutn and welding continuesly, Thanks againmember.cardomain.com/gman211203Comment
-
If you are removing them with a grinder, I'm sorry to say they will most likely be destroyed and you will need to replace them.
Is your frame already damaged?; How long were the current SFC's connected, who put them on, and how can you tell they are out of line?sigpicComment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...2 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...3 weeks ago
Comment