Hello,
I have a 3.42/Posi/Drum rear end right now and I bought a used 3.73/Posi/Drum rear end. [img]smile.gif[/img]
The problem is the 3.73 rear end, the drums are completely taken apart. Instead of disconnecting the E-Brake cable from the body area, he unhooked the cable from the inside of the brake drums by removing everything..
So, What I have to so is this, Either reassemble the brake drum assembly and connect the E-brake wire inside of the drum, OR remove my axles from my rear end completely assembled and install them in the 3.73 rear end.
What do you guys think? I believe there are only 4 bolts holding the axels on and I could just swap the axels, but I would still like to know how to reassemble the drum assembly. There are MANY springs and clips. :(
Can anyone help me out here?
Thanks.
I have a 3.42/Posi/Drum rear end right now and I bought a used 3.73/Posi/Drum rear end. [img]smile.gif[/img]
The problem is the 3.73 rear end, the drums are completely taken apart. Instead of disconnecting the E-Brake cable from the body area, he unhooked the cable from the inside of the brake drums by removing everything..
So, What I have to so is this, Either reassemble the brake drum assembly and connect the E-brake wire inside of the drum, OR remove my axles from my rear end completely assembled and install them in the 3.73 rear end.
What do you guys think? I believe there are only 4 bolts holding the axels on and I could just swap the axels, but I would still like to know how to reassemble the drum assembly. There are MANY springs and clips. :(
Can anyone help me out here?
Thanks.
Comment