anyone w/ GFX and lowering springs?????

[andrew N.]

if so, how well is that working out for you, im looking into a 1.5" drop, but i already have GFX. should i go w/ a 1 inch or none at all????

[SweetNsLowV6]

I got 17" 10 spokes and the stock GFX kit and its low, i cant even jack it up or put it on my lift, so, if u plane on working on ur car, or keeping the paint on the bottom intact, i wouldnt lift it, or do what im doing, and get an air suspension kit [img]smile.gif[/img]

[Arctc Wolf]

a coil-over setup would be the easiest to work w/ when you have gfx. I don't recommend going more than 1" lowering w/ a body kit unless you know you can make it over speed bumps and can clear your jack. There are several coil-over kit out there for our cars. The one I'm looking at it the ground control coil-over kit and using koni single adjustable shocks w/ them.

[ProjectX]

I have GFX and the pro kit springs. It is low but looks sweet I am putting my 18's back on to compliment them here is a pic for you though of what it looks like. Hope it helps

[1999V6]

1.2 drop in the front, 1.7 in the back...with the stock ground effects...never scraped them once. You just have to be careful thats all. Go ahead and do it.

[redbird00]

man thats low 1999v6 and you never have problems bottoming out with it, i have the ww front air dam and its hard to keep that thing off the ground...

merlin

[1999V6]

Yeah I have had no issues with it. I mean sure its low...only difference is...you have to be aware of whats infront of you on the road more. Just pay attention and your good to go. [img]smile.gif[/img] All the looks I get are definately worth it [img]smile.gif[/img]

Since you have the WW one..i think thats the diff. My stock front w68 gfx kinda of slope off while yours covers the whole front. Is that where your scratching it the most...right in the center??

[Formulao96]

Hey, I have a 2" drop with the erebuni kit on it, and it is very low. I measured 3.5 inches off the ground. I also have 18" wheels. I am having problems getting a jack that goes low enough to fit. Here is a pic. Here is link just incase http://formulao96.0catch.com/KIT.JPG (copy and paste)



[ July 24, 2002: Message edited by: Formulao96 ]

[ July 24, 2002: Message edited by: Formulao96 ]</p>