Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
They’ll fit, Goggle C7 rims on Fbody, it brings up LS1tech, has some threads and pics, looks good. Later on I might do some 18’s but it will be awhile. They say OEwheels is a good place to look. Just reread your post, don’t know about Stingray rims. Might be in those threads on LS1tech.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Must be my internet I can't find anything on google and I can only find a few threads on LS1tech with none of them giving any confident answers. I made a post over there too but it's been crickets.
Yeah it’s pulling up picks of the stingray C7’s on the F body , I’ll see if I can post some here for you.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
This what I gathered from reading a few posts, C7 Stingray rims have a different bolt pattern but aftermarket companies make them for F bodies.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
That one link you posted Steve had the exact rims on the TA. Looks like they needed a 1.25” spacer to do it. Question is where can I buy a high quality 1.25” spacer that isn’t cheap chinese crap…
That one link you posted Steve had the exact rims on the TA. Looks like they needed a 1.25” spacer to do it. Question is where can I buy a high quality 1.25” spacer that isn’t cheap chinese crap…
I got my 1” spacers from Summit, I think it’s been over 10 years, not sure.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
I have read that for rear rims with that offset to work I would need to run a 1.25" spacer - is that true? I think these sound like they might be similar spec to the OEM C6 rims? What size bore/hub would I need to get for my spacer?
Am I correct in assuming that the front will not need a spacer to work? Did anyone that runs this type of offset wheel need to eliminate the rear bump stops?
I had a factory Vette 17 and 18 combo on my 2001 Bird and I needed to remove the bump stops I also needed to remove the brackets with a sawzall.
really? My 18/17 setup is fine. I never needed to remove the bump stop or brackets. Did you have an adjustable panhard rod?
I am going to look at and hopefully grab the C7’s tonight. I need to order the 1.25” spacers for the back. Probably going to order the spacers to the states so test fitment will need to wait.
really? My 18/17 setup is fine. I never needed to remove the bump stop or brackets. Did you have an adjustable panhard rod?
I am going to look at and hopefully grab the C7’s tonight. I need to order the 1.25” spacers for the back. Probably going to order the spacers to the states so test fitment will need to wait.
Excited for the setup…
Nice Mike, should look outstanding on your Camaro.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
That’s cool they came with the tires, how much were they? I thought they’d be installed by now.lol
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment