Tweet
my camaro leans on one side more than the other. I put shocks and springs in teh back and raised it up a little but I am still not satisfied. Could the tracking bar be bent and make it lean? or do i need to put struts in the front to make it even. The car was hit in the passenger door/quarter panel thats why i got the car so cheap. but its all fix
-
-
Re: got a problem
Does the passenger side look lower? If so thats normal. The car was designed to sit even when the driver gets in.
-
Re: got a problem
yea the passenger side looks lower and i even got in that side before and i can tell a big difference from the driver side. So thats normal, thats kinda weirdComment
-
Re: got a problem
My car used to sit about 1"1/2 lower on passanger side. My Springs all the way around were too week for the car. I installed Z28 springs up front with new strutts, and air shocks in the rear. My car now sits about 2" higher then stock, and the lean is now only about 1/2". http://www.cardomain.com/ride/2245261/6<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...2 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...3 weeks ago
Comment