Just Want to Say Hey!

[NOS2006]

Looks like I'll be busy with my suspension for a little bit here, so I figured I'd make a good welcome.

I just put in an SS (32mm) front swaybar and "heavyduty" endlinks. Today I got my 3.73s and LSD put in, and the guy said he had some extra V8 rear swaybars so he gave me one. Then I'm going to have to get some rear LCAs...

Oh, and I just replaced my passenger side outter tie rod during the spring and am going to do the other one soon, too. So, yeah, I'll probably be in here quite a bit looking at posts and such.

What do you guys think about this "beefier" setup? And where should I go for good, economical LCAs?

[97rs4life]

Re: Just Want to Say Hey!

Lakewood LCAs are an economical solution to LCAs. Quite a few guys run them and like them for their price.

http://www.freewebs.com/gvvs/fbodysuspension.htm

[NOS2006]

Re: Just Want to Say Hey!

More than I expected, but not too bad at all. Thanks!

[CamaroRob97]

Re: Just Want to Say Hey!

For LCA if you want to drag get poly bushings.

If you want to handle stay with rubber or get rod-ends or a combo.

[V6Bob]

Re: Just Want to Say Hey!

I just put in an SS (32mm) front swaybar and "heavyduty" endlinks. Today I got my 3.73s and LSD put in, and the guy said he had some extra V8 rear swaybars so he gave me one.

What do you guys think about this "beefier" setup?

IMHO, the V8 rear bar is too big for stock springs, especially if you have a 98+. The bars have different purposes. The front bar controls roll, the rear is a tuning device. It needs to be the right size, not too small, not too big.