Tweet
Well I have found some rear bump stops to replace the onces that had pretty much deteriorated. I went to the junk yard today and I found out that the rear bump stops from 3rd gen Fbodies are the same as those on 4th gen Fbodies. So if you ever need to get some new ones just get some at a junk yard from an old Fbody.
-
-
Re: Rear Bump Stop FYI
thanks for the advice!Dave:
00 Supercharged Camaro - RIP
97 Turbo Camaro - Sold -
Re: Rear Bump Stop FYI
here's some more rear bumpstop advice goodness.. if you ever lower your car and find the rear hitting the bumpstops too often (very harsh ride over bumps), you can remove the rear bumpstop spacer!
yes.. there's a metal spacer there that you don't really need because the bumpstops have metal backings that mount to the body just fine. removing the spacers gives more suspension travel and is almost a must if you ever lower your fbody.Comment
-
Re: Rear Bump Stop FYI
good advice, thanks!Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...2 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago
Comment