Tweet
I have a 95 3.4 with stock drums, what would I need to change to disc? Eny info would help...
-
-
Re: Drums to Disc
contact speedingfirebird....he just did it to his firebird
87 Firebird RIP
96 Camaro RS RIP
94 Patriot Red 1LE Z28 - Sold
02 WS6 TA - Sold -
Re: Drums to Disc
I removed and replaced the whole rearend. The wife picked up a rearend from a Z28, check the gears first, and the drive shaft from a strip lot while I was deployed.
Rob\"A one that isn\'t cold, is scarcely a one at all\" <a href=\"http://www.homestarrunner.com/sbemail.html\" target=\"_blank\">Strongbad</a>Comment
-
Re: Drums to Disc
Theres a write up in the HOW TOs: to do the swap, it is what I followed. Pretty straight forward.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Drums to Disc
i would deff do the whole rear-end swap. fastest wayWAWA-A-HOLIC
Comment
-
Re: Drums to Disc
Before...
During...
After...
Rob\"A one that isn\'t cold, is scarcely a one at all\" <a href=\"http://www.homestarrunner.com/sbemail.html\" target=\"_blank\">Strongbad</a>Comment
-
Re: Drums to Disc
Plus if you do a rear-end swap and choose wisely, you could end up with a limited slip differential. A very nice thing usually.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...2 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago
Comment