lca relocation brackets

[Bonemaro]

Re: lca relocation brackets

with a stock ride height? this wont have a negative effect on my handling correct?

I read that it will, yes. Let me see if I can find that write up.

[Bonemaro]

Re: lca relocation brackets

This is what I read, for what it's worth.

"A word of warning putting the LCA's at there lowest setting (on an unlowered car) will make the car loose, so before really cornering the car hard, you might want to feel out how the car handles after the mod."

[LETZRIDE]

Re: lca relocation brackets

so once you put them on a setting say the lowest one...do you have to go through almost the whole installation again to change holes? or would it now be as simple as popping out that bolt, sliding the arm up then screwing it back in?...so essentially a 5 minute job?

[Bonemaro]

Re: lca relocation brackets

so once you put them on a setting say the lowest one...do you have to go through almost the whole installation again to change holes? or would it now be as simple as popping out that bolt, sliding the arm up then screwing it back in?...so essentially a 5 minute job?

I don't know about 5 minutes, but yeah, pretty much as simple as popping out the bolt and moving it up..

[SpeedingFirebird]

Re: lca relocation brackets

I don't know about 5 minutes, but yeah, pretty much as simple as popping out the bolt and moving it up..

In THEORY, this is true. But in practice, it might take a little work. Getting the holes to line up perfectly took a little time.

[Bonemaro]

Re: lca relocation brackets

In THEORY, this is true. But in practice, it might take a little work. Getting the holes to line up perfectly took a little time.

I hear the holes can be a Bee Eye Itch, but I say, just get a bigger hammer.

[Meatyshells]

Re: lca relocation brackets

all you have to do is raise/lower the rear untill the bolts line up

[SpeedingFirebird]

Re: lca relocation brackets

all you have to do is raise/lower the rear untill the bolts line up

in theory. assuming everything is perfectly squared off.

[IDoVoodoo]

Re: lca relocation brackets

my umi bolt-in brackets didn't line up at all. I had to do some "massaging" of a few holes to get it bolted in.