brake drag - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

brake drag

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • brake drag

    almost ever since i got my car, ive noticed a lot of brake dust on the front rims, and it seems to be getting worse, when i put my car in neutral going down hills, it seems like its dragging a lot, and when i jack it up and spin the front wheels, you can hear them rubbing and turn a lot harder then they should Is it the calipers not releasing or something else? thanks

  • #2
    Re: brake drag

    How old are the pads/rotors? Were they properly serviced last time? When jacked up, you will hear rubbing and it will take some effort to turn them, but they shouldn't be that hard to turn. It may be time for some new calipers, or a rebuild kit.
    sigpic
    1996 Chevrolet Camaro
    1995 Buick Park Avenue Ultra
    --Appearance Moderator--

    Comment


    • #3
      Re: brake drag

      is your brake light switch pushed in too far, which is causing your brake to be constantly pressed down?

      this happened to me

      Comment


      • #4
        Re: brake drag

        I would recommend first taking both front calipers off and greasing the pins well. Make sure you use a proper silicone based grease. Go to a parts store and ask for some caliper pin grease, they should know what you need. The stuff I use is from Napa, part #765-1351
        -<i>Travis</i><br /><b>99 Trans Am, Pewter, A4</b> Forged, stalled, and cammed<br /><b>85 Buick Regal WH1 T-Type</b> It\'d be cool if it ran...<br /><b>94 Camaro 3.4, Teal, M5</b> The daily beater

        Comment

        Latest Topics

        Collapse

        • Dongrossmd
          Throttle Position Sensor trouble shooting
          by Dongrossmd
          I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
          3 weeks ago
        • ssms5411
          New stereo
          by ssms5411
          Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
          3 weeks ago

        FORUM SPONSORS

        Collapse
        Working...
        X