Spring hose trick - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Spring hose trick

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Spring hose trick

    Originally posted by 3.4 slow to go View Post
    don't expect a long life using hose, but a gdecent temp fix
    I used a $3 garden hose I got form big lots... wasn't even starting to wear through it after 2 years, ~30k

    Comment


    • #17
      Re: Spring hose trick

      and forget the "you'll put your eye out if you do a suspension spring like that" talk....

      #1 reason not to do it that way, if prybar slips or your hand slips you will whack your knuckles, and that hurts.

      Or you could undo 4 extra bolts and not have any issues.

      Comment


      • #18
        Re: Spring hose trick

        Originally posted by DAS BOOT View Post
        Or you could undo 4 extra bolts and not have any issues.
        2 bolts

        Comment


        • #19
          Re: Spring hose trick

          Originally posted by Smoke Panther View Post
          2 bolts
          wouldnt it be 4 since there is 2 bolts on each side?

          Comment


          • #20
            Re: Spring hose trick

            Originally posted by cam98aro View Post
            wouldnt it be 4 since there is 2 bolts on each side?
            yes but you only need to unbolt 1 from each shock to get the rearend loose.

            Comment


            • #21
              Re: Spring hose trick

              Originally posted by cam98aro View Post
              wouldnt it be 4 since there is 2 bolts on each side?
              wouldn't it be a waste of time to remove the entire shock?

              Comment


              • #22
                Re: Spring hose trick

                I say 4 bolts...

                1 bolt per shock

                1 endlink per side for sway bar.

                And you can drop the rear as far as the panhard rod will let you.

                Comment


                • #23
                  Re: Spring hose trick

                  Originally posted by DAS BOOT View Post
                  I say 4 bolts...

                  1 bolt per shock

                  1 endlink per side for sway bar.

                  And you can drop the rear as far as the panhard rod will let you.
                  Jack up rear,remove bottom two bolts of the shocks, lower rear,remove springs, done.

                  Comment

                  Latest Topics

                  Collapse

                  • Dongrossmd
                    Throttle Position Sensor trouble shooting
                    by Dongrossmd
                    I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
                    3 weeks ago
                  • ssms5411
                    New stereo
                    by ssms5411
                    Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
                    4 weeks ago

                  FORUM SPONSORS

                  Collapse
                  Working...
                  X