question about installing front upper and lower A-Arm bushings from energy suspension

[Tyler]

im at 125k miles and my car has had ****ty tires for the passed, say, 8k miles...

the front end shakes like hell between 35 and 50 and pulls hard to the right.

well anyways i got new tires and bushings for the a arms since they've suffered some abuse lately.

first question

these are factory a arms. hopefully you can replace bushings on them? i can't remember correctly but i thought i read somewhere that you can't replace the bushings on our stock a arms?

and if you can......
do you have any recommendation as to where to go to get these installed? did anybody have a shop do it for them? and how much did it cost?

edit: its a 96 and these are the bushings....(not actual picture) http://cgi.ebay.com/ebaymotors/Front...Q5fAccessories

[Slowside]

Re: question about installing front upper and lower A-Arm bushings from energy suspen

I went with moog bushing and go to the cheapest chump to get them put in because its a *****.

[ssms5411]

Re: question about installing front upper and lower A-Arm bushings from energy suspen

Usaually a allignment place will swap the bushings for you and then do the allignment after their done. Make sure you do your tie end rods too since your doing the others.