Tweet
SOMETIMES when I pull the lever on my e brake it doesn't always light up on my dash any thoughts ?
-
-
Re: e brake
I'll activate the e brake and pull it all the way up and nothing shows up on my dash to show that its engaged -
Re: e brake
Any one know why it does this ?Comment
-
Re: e brake
maybe the contact point under the center console?
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual convertedComment
-
Re: e brake
Connector for E-brake or like Meaty said contact point is bad.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: e brake
does any one have pix ? and I have an a4 so how many bolts do I need to take of so my console comes offComment
-
Re: e brake
To get the console off on an a4, you open up the center console, and there's two little bolts in there... take those out, and then the middle piece should lift up. to get the entire base off (to get to the airbag unit and some other wires and crap) there are more bolts in the bottom of the center console and a couple up under the dash below the radio and stuff... they kind of bolt onto two metal tabs that stick out, one on each side.
I'd go take some pictures, but my car is at my house, and sadly I'm at college without it... :(Comment
-
Re: e brake
get a small screwdriver and pry the clip out that holds on the shifter, and take those couple of screws out, its really easy.Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.Comment
-
Re: e brake
can any one post pix of what I am looking for ?Originally posted by inheritthefire View PostComment
-
Re: e brake
What does the connection for the e brake look like ?Comment
-
Re: e brake
just look at the e- brake assembly, you will see a little thing with two tabs on it and wires.Originally posted by Jaysan View Post
when the e brake hits it, it makes the light come onComment
Comment