At what RPMS do most ppl launch - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

At what RPMS do most ppl launch

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • At what RPMS do most ppl launch

    On the track out here in San diego I cant get anything goind, maybe 1500 on street tires. It makes me sad, cause around town I can launch at about 3000 now. I try more and more each day. Man it feels great to launch @ that RPM with no spin, but at the track they just spin, Crappy track. =( Im on the stock Tq Converter I asked somewhere else if anyone knew the Stall rpm -
    97 Special Edition Bird , Short bus stlye special

  • #2
    Well I have a manual but... On my Kumho's I can only launch about 1100-1200 rpm.

    With the nittos I should be able to launch around 1600-1700... I dunno really b/c I've only made 2 runs with the nittos. Maybe with a good burn out and lower air pressure I could launch a lot harder.

    With street tires you want to avoid the water box, then spin them over once or twice to clean them off. Most street tires do worst if you do a burn out.
    Keith - 99 'maro - White M5 - bumpstick and boltons - 13.65 @ 101 N/A
    "I ain't too big to listen to the rumors, I'm just too @#$% big to pay attention to them" - Dr. Dre
    http://seppo.hopto.org/

    Comment


    • #3
      I launch used to launch at 3,000 on street tires. With the 3.73 gear I cant launch no higher then 2,200 and I still spin a but load.

      Comment


      • #4
        On my 15.6 run I launched at 2900ish on street tires and got a 2.12 60'

        Comment


        • #5
          I usually launch at around 1800 rpms. I get regular 2.04 60 foots with a best of 2.03.
          <b>99 Camaro Z28 A4</b><br />R.I.P. 00 Firebird 3.8<br />14.89 @ 90, 2.03 60\'

          Comment


          • #6
            Street - dead hook (most of the time [img]tongue.gif[/img] ) with a 1,400rpm stall and then flashing the converter.

            Track - (it sucks) but the best I can muster is a 2.12 doing a 1,700-1,800rpm and on the third yellow, release the brake and THEN hit the gas...kinda like a rolling go. Oh I usually stage shallow as well so it's like a rolling start [img]tongue.gif[/img]

            [ March 20, 2003: Message edited by: 99Camaro99 ]</p>

            Comment


            • #7
              <blockquote>quote:</font><hr>Oh I usually stage deep as well so it's like a rolling start <hr></blockquote>

              deep staging gives u a better RT and better 60' but it can hurt ur ET

              I launch at about 1500, its the highest ive tried to go.
              Matt
              -Matt<br />Manager/Tech Support<br />Precision Speed & High Performance<br /><br />visit us on the web at:<br /><a href=\"http://www.precisionspeedonline.net\" target=\"_blank\">www.precisionspeedonline.net</a>

              Comment


              • #8
                <blockquote>quote:</font><hr>Originally posted by camaro97:


                deep staging gives u a better RT and better 60' but it can hurt ur ET

                I launch at about 1500, its the highest ive tried to go.
                Matt
                <hr></blockquote>

                whoops...I meant shallow stage...lolololol. I edited the above post to fix it

                [ March 20, 2003: Message edited by: 99Camaro99 ]</p>

                Comment


                • #9
                  rev limiter at wot? :D

                  Comment


                  • #10
                    2700-3000 at the line
                    Race car - gone but not forgotten - 1997 firebird V6
                    nitrous et & mph: 12.168 & 110.95 mph, n/a 13.746 & 96.38 mph
                    2013 Dodge Challenger SRT8: 12.125, 116.45
                    2010 Ford Taurus SHO: no times yet

                    Comment


                    • #11
                      about 3500 after the limited slip install :D
                      2011 Camaro LS 6M, in black.

                      Comment


                      • #12
                        I launch 3500-4000 depending on the track prep, I once dead hooked around 4500 :D

                        All are usually dead hooks as long as I compensate for the incompentency of the track prep, on street tires.

                        I cut 2.0XX-2.1XX 60's pretty consistantly, like I said depending on the random track prep.

                        Comment


                        • #13
                          <blockquote>quote:</font><hr>about 3500 after the limited slip install <hr></blockquote>
                          <blockquote>quote:</font><hr> I launch 3500-4000 depending on the track prep, I once dead hooked around 4500 <hr></blockquote>

                          guess thats the beauty of having a 5 speed... Well i love my auto

                          Matt
                          -Matt<br />Manager/Tech Support<br />Precision Speed & High Performance<br /><br />visit us on the web at:<br /><a href=\"http://www.precisionspeedonline.net\" target=\"_blank\">www.precisionspeedonline.net</a>

                          Comment


                          • #14
                            LoL, love the M5? no way, Im launchin my Auto at 3500 now, Im gonna try 4500 right now. =)Thanks for the replys guys =)
                            97 Special Edition Bird , Short bus stlye special

                            Comment


                            • #15
                              <blockquote>quote:</font><hr>Originally posted by Takumi Fujiwara:
                              LoL, love the M5? no way, Im launchin my Auto at 3500 now, Im gonna try 4500 right now. =)Thanks for the replys guys =)<hr></blockquote>

                              :rolleyes: ok dude whatever. First you have a stock TC and now you launch up there... :rolleyes:

                              Comment

                              Latest Topics

                              Collapse

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X