Tweet
Can any one tell me how I can remove my shifter knob on my 92 f-body. I recently aquired a leather covered handle and need to know how to take the old shifter off to replace it.
-
<a href=\"http://home.earthlink.net/~spcboshears/\" target=\"_blank\">That other car is going to give Trans Am a terrible reputation</a> -
auto or stick?1978 Formula 461 in progress of being built :rock:
2013 Ram 1500 Big Horn
former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
94 comero 3.4 -
if its an auto , there is a pin in the front of the shifter .shift it down to first to make it easier. then use a screw driver or needle nose plyers to pull that pin out (it looks like a staple when its out) and after you get that out the knob will come right off . if its a stick , im assuming it would thread off like my s10 does [img]smile.gif[/img]
[ September 01, 2002: Message edited by: jeff-87z ]</p>1987 z28 . lg4 305 . edelbrock performer intake , 600 cfm performer carb , all smog equip gone . gutted cat . slp headers with y/pipe and cat back , mild street cam . pocket ported heads<p>14.1@97 mph w/2.1 60\' .Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...2 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...3 weeks ago
Comment