Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
but i don't get it.. do you have to cut into the stock bumper or what? The xenon one is cut around the blinkers.. while the stock bumper front is one piece through the blinkers and up to the headlights.. how does it fit??
~The Guru\'s Guru~<br />1999 Camaro,K&N,!MAF<br />!airsilencer,3.08s,<br />NGK-TR6\'s,Taylor Blue 8mm wires,FRAM,A4,Catco Cat, Magnaflow 3 inch catback,transgo shift kit<br />Waiting: RK sport headers, custom y pipe electric cutout<br /><a href=\"http://www.cardomain.com/id/divinejc\" target=\"_blank\">www.cardomain.com/id/divinejc</a>
_davjos81- 02 v6<br /><a href=\"http://www.cardomain.com/id/davjos81\" target=\"_blank\">www.cardomain.com/id/davjos81 </a><br /><a href=\"http://community.webshots.com/user/davjos81\" target=\"_blank\"> <a href=\"http://community.webshots.com/user/davjos81\" target=\"_blank\">http://community.webshots.com/user/davjos81</a> </a> <br /><br />-over $8,000 invested! Too many mods to list, just check out my site!!
i have this kit and it goes on top.......it should come with 4 self tapping screws and double stick tape
2001 Black Camaro<br /><br /><br />I have no clue how i beat you.....maybe your car is slow.<br /><br />Whisper lid, SSRA, Pacesetter Headers, Carsound 3\" Cat, SLP Loudmouth, BMR strut brace, black ZR-1 rims, Xenon kit
does it look crappy, or blend right in? I see the cut under the blinkers on the car itself. and i see the kit ends under the blinker, and it goes around the grill towards the top and inside of it.. so i guess it would blend.. does it look right?
thx
~The Guru\'s Guru~<br />1999 Camaro,K&N,!MAF<br />!airsilencer,3.08s,<br />NGK-TR6\'s,Taylor Blue 8mm wires,FRAM,A4,Catco Cat, Magnaflow 3 inch catback,transgo shift kit<br />Waiting: RK sport headers, custom y pipe electric cutout<br /><a href=\"http://www.cardomain.com/id/divinejc\" target=\"_blank\">www.cardomain.com/id/divinejc</a>
I had this kit briefly before selling it off. Like the others it's very thin, almost plastic utensil thin. And the material is very flexible. It looks really cheap before it's painted and installed.
<a href=\"http://www.cardomain.com/id/camazoic\" target=\"_blank\">http://www.cardomain.com/id/camazoic</a><br /><br />Interest:Sports,Cars,Sport Cars,Sports with Cars in them, and using my Car to Sport(obselete meaning) in.
lol, thats my car....I forget where I bought it from, and actually it's not that thin, I might give it 1/8in thick, verey duable material though, make sure enough flex additive is added into the pain though or you will get alot of cracks...I think I paid 600$ for the whole thing....worth it to me...but I dont like E-bay....and dmiller, where did you find the pics of my car?...besides my sig unless thats where you found it....cause you could have at least said thats nikon's car ;)
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment