Doors not locking, actuator stuck - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Doors not locking, actuator stuck

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Doors not locking, actuator stuck

    So I had power doors added with my alarm in 2009 from bestbuy, now it seems that I can't lock my doors. Try manually and their stuck in the unlock position, even when I use the remote to lock them. Was just the passenger side , but now the drivers side is doing the same thing. Do the actuators go bad in the unlock position. Never messed with them before or door actuators, ordered a universal set for $13 shipped, and will pull the doors apart to examine when I get them. Just wanted to see if anyone else knew anything about aftermarket door locks.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

  • #2
    Not sure if they go bad, but it wouldn’t suprise me. When I was in my 02 and my bcm was going bad and I was messing with it, I was in the car and locked the doors and my power fried. When the power fried the door locks got stuck locked and I could not overpower them manually to open the doors up- I essentially was locked in the car.

    So it doesn’t suprise me the reverse can happen as well

    2002 SOM Z28 Camaro - 12.9 @ 104 mph
    1996 3800 Camaro - 13.43 @ 100.77 mph


    Project Cars | How To Guides | Scratch Repair | Synthetic Oil

    Comment


    • #3
      Yeah, I hope either I can fix it or I'll just go back to manual locks.
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

      Comment


      • #4
        Went ahead and pulled the drivers door apart, luckily its just the adjustment screw. Got the passenger side done, now that I know where the adjustment screw is on them , don't even have to take the door apart, just the screws and pull it back alittle and I can get to the screws.
        Last edited by ssms5411; 04-07-2019, 06:25 PM.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

        Comment

        Latest Topics

        Collapse

        FORUM SPONSORS

        Collapse
        Working...
        X