Tweet
Hi every one. I have a question about an amp install. Now all my power and ground wires have been run. I have hooked up the remote turn on and its ground. I get power to the amp as the power light comes on. Now when i hook up my rca to the back of my deck, and hook up the rear speakers, I get no sound what so ever. There are like 5 rca out puts from the Clarion deck that I have, and I have tried using all of them. I have even just got a older speaker and hooked it up to the amp and still i get no sound. The amp that I was using at first was a Clarion 4 channel amp. It would produce sound that would cut in and out. I think that amp may have been messed so I sent it for repairs. I just baught a pioneer 2 channel amp, and thats the one that is producing now sound. Any advice on what could be wrong? I should mention that I have run new 16awg wire to the speakers in my 97 Camaro. Thanks for any help
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...4 weeks ago
